Serving the Tampa Bay Area
    Cantilever Rack warehouse storage system
    Oldsmar, Florida

    Cantilever Rack in Oldsmar, FL

    Cantilever rack in Oldsmar organizes metal tubing and profiles on arms matched to their bearing requirements rather than leaving mixed lengths in floor stacks. The uprights sit behind the load, with no front columns breaking up the storage face. That geometry allows long stock to span successive supports while preserving direct access to each assigned level. It also makes support spacing a central purchasing decision, not a detail to settle during assembly.

    Tampa Road and Race Track Road connect industrial buildings serving electronics, fabrication, and regional distribution. In that setting, a tube-storage row should fit the movement between receiving, cutting, and assembly. Cantilever racking can carry the long raw stock while selective pallet rack holds palletized components separately. Neither system should force a forklift to cross occupied workstations simply to reach its next load.

    (813) 723-3771

    Cantilever storage rack layout, supply, and assembly

    Single-sided storage can follow a building edge, leaving one working face toward production. Double-sided storage can separate material families across an open-floor row, but both aisles need to remain accessible. Indoor placement and outdoor exposure call for different specification checks, including finishes and structural loading conditions. We establish the intended location before choosing components so an uncovered yard is not treated like an enclosed room. A cantilever rack schedule should distinguish solid-stock levels from those assigned to hollow sections.

    For installation, we schedule and manage experienced crews against the reviewed arrangement. The scope covers base positioning, upright alignment, bracing connections, and arm settings shown in the documentation. Explain the loading assignments to operators before the first bundle arrives. A later change from tube to solid bar calls for another capacity review even when the replacement material appears to occupy less space.

    Oldsmar warehouse racking · Long-load support options · FIFO pallet storage in Oldsmar · Bulk pallet lanes in Oldsmar

    Fabrication tubing sorted by section and length
    Solid bar bundles needing clear weight assignments
    Long profiles moving between receiving and cutting
    Call (813) 723-3771

    Cantilever racking sized for tube, not pallet counts

    A narrow bundle of solid bar can weigh more than a much deeper pack of hollow tube. Arm projection therefore answers a different question from arm capacity: one concerns bearing depth and the other concerns load demand at the specified position. Both feed into upright and base selection. We also check whether the proposed combination of occupied levels stays within the assembly rating on each face.

    Column centers must reflect material flexibility and minimum retained length. Thin tube, pipe, lumber, and sheet goods may need closer bearing points or specified decking compared with stiff profiles. Overhang should be deliberate and balanced where the load arrangement allows it. Do not assume a bundle that spans several columns remains adequately supported when production removes most of its contents or returns shorter pieces.

    Tampa Pallet Racks operates as a division of Warehouse Equipment & Supplies Co.; the business has supplied and installed storage equipment since 1997. Our planning discussion connects load characteristics, handling access, and the component schedule rather than treating the purchase as an undifferentiated run of steel.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    Cantilever warehouse racking holding steel tubing
    Cantilever rack storing lumber and wood products

    Link raw-stock storage with the next process

    Place the cut-stock handoff on the drawing alongside the rack. This makes the travel route visible before a row is positioned across a production connection.

    electronics
    fabrication
    and regional distribution

    Cantilever rack loading details to settle first

    A useful specification follows the material through receiving and partial withdrawal. These checks establish the information needed before row length and height are finalized.

    1

    Document the stock range

    List minimum and maximum lengths, bundle depths, and heaviest weights by material family. Include cut returns when they will occupy the same supports as incoming stock.

    2

    Set support locations

    Check the required bearing points for each load rather than using a single spacing rule. Identify any levels needing a deck, separator, or product-contact protection.

    3

    Confirm the rated assembly

    Select arms for their actual loading position and review cumulative loads on uprights and bases. Keep the planned arm elevations tied to the specified structural configuration.

    4

    Reserve handling space

    Compare a conventional forklift approach with side-loader travel using the actual truck dimensions. Include the full bundle sweep, fork withdrawal, and space for the next transfer.

    Recent Pallet Rack Projects

    A look at recent pallet rack installations across the Tampa Bay area.

    Selective pallet racking with wire decking in a warehouse

    Selective Pallet Racking

    Selective pallet racking fitted with wire decking across each level.

    Selective pallet racking with wire decking under a wood-truss roof

    Selective Racking with Wire Decking

    Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

    Carton flow racking with roller lanes

    Carton Flow Racking

    Pallet racking set up with carton flow roller lanes on the lower levels.

    Drive-in pallet racking with deep storage bays

    Drive-In Pallet Racking

    Drive-in pallet racking built with deep bays that store pallets several positions deep.

    Selective pallet racking with wire decking

    Selective Pallet Racking with Wire Decking

    Selective pallet racking fitted with wire decking across each level.

    Selective pallet racking in a warehouse

    Selective Pallet Racking

    Selective pallet racking installed across a warehouse.

    Selective pallet racking with wire decking

    Selective Pallet Racking

    Selective pallet racking fitted with wire decking.

    Selective pallet racking in a warehouse

    Selective Pallet Racking

    Selective pallet racking in a warehouse.

    Push back pallet racking with nested carts

    Push Back Pallet Racking

    Push back pallet racking with nested carts that store pallets several deep from one aisle.

    Selective pallet racking along a warehouse wall

    Selective Pallet Racking

    Selective pallet racking set up along a warehouse wall.

    Start with your material schedule

    Reach us at (813) 723-3771 to compare support arrangements before choosing the number of arms or uprights. Call (813) 723-3771.

    Tampa Pallet Racks

    7402 N 56th St.

    Ste 355-580

    Tampa, FL 33617

    (813) 723-3771

    Monday - Friday: 7:00 AM - 7:00 PM

    We respect your privacy. Your information will never be shared.

    Tube-storage purchase decisions

    Nearby Areas We Also Serve

    Our delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.

    Tampa Pallet Racks

    Address

    7402 N 56th St.
    Ste 355-580
    Tampa, FL 33617

    Business Hours

    Monday - Friday: 7:00 AM - 7:00 PM
    Saturday: Closed
    Sunday: Closed

    Need Cantilever Rack in Oldsmar?

    Call (813) 723-3771 or request a quote and we will get a layout started.

    (813) 723-3771
    Call Now