Serving the Tampa Bay Area
    Cantilever Rack warehouse storage system
    Clearwater, Florida

    Cantilever Rack in Clearwater, FL

    Cantilever rack in Clearwater gives aluminum profiles and tubing their own supported locations beside the fabrication workflow. Arms project forward from rear uprights, leaving no front columns to interrupt access along a long bundle. That open face is useful only when arm depth, load rating, and column centers match the stock being handled. A layout should therefore begin with incoming bundles and the shorter pieces returned from production.

    The US-19 corridor and NE Coachman industrial area combine light manufacturing with parts distribution and fulfillment. Those activities can share a building without sharing the same storage method. Cantilever racking serves long raw materials; selective pallet rack provides individual pallet access for packaged parts and finished orders. Drawing both zones together prevents a profile-storage row from taking the space needed to feed machines.

    (813) 723-3771

    Cantilever rack planning around the production route

    Use the path from incoming stock to the cutting station to decide where each face belongs. Keep room for the load itself throughout that movement.

    1

    Separate length families

    Group full-length profiles, cut returns, and sheet packs by their bearing needs. Assign supports that keep the shortest retained material from falling between upright positions.

    2

    Check arm loading

    Identify the deepest pack and heaviest bundle for each level. Account for uneven bearing rather than assuming every arm receives the same share of weight.

    3

    Lay out the truck approach

    Model the forklift with its longest load and working lift height. If a side-loader is available, use its actual travel envelope and transfer motion when setting aisle dimensions.

    4

    Choose row orientation

    A single-sided row can face the production aisle from a perimeter position. A double-sided island needs separate access space on both sides, including room to collect cut material.

    Cantilever racking specification through installation

    Indoor locations require a check of clear height, overhead obstructions, and the lift needed above each arm. Outdoor storage changes the exposure assumptions and component finish selection; it is not simply an indoor row placed outside. Sheet packs may require decking or another specified support surface. Retention for pipe must suit the loading method without preventing the forks from placing the bundle correctly. For this cantilever rack, show the production-side transfer point alongside the supported profile positions.

    Experienced installation crews are scheduled and managed for the agreed scope. They position bases, align uprights, complete bracing, and establish the documented arm elevations. Review the installed configuration and load labels with the people assigning material locations. Keep the stated arm and column limits available when inventory changes, especially when a formerly light profile position receives heavier solid stock.

    Clearwater warehouse racking · Long-load support options · FIFO pallet storage in Clearwater · Bulk pallet lanes in Clearwater

    Aluminum profiles awaiting fabrication
    Tube and bar stock grouped by cut length
    Sheet packs requiring a defined bearing surface
    Call (813) 723-3771

    Cantilever storage rack choices for profile handling

    Thin-wall tube can deflect differently from solid bar even when the bundles occupy similar space. Lumber, pipe, and sheet stock introduce still other bearing requirements. We ask about product stiffness, packing bands, surface protection, and whether operators remove a whole bundle or individual lengths. Support spacing must suit the remaining stock as well as the full receipt, particularly where short offcuts return to the same area.

    Choose arm length from the pack dimension extending away from the upright. Then evaluate capacity at the specified load position and check the upright, base, and bracing as an assembly. Adding arms to an existing column does not establish a higher total rating. Retaining devices for round stock and suitable bearing surfaces for marked profiles should be defined before purchasing, not improvised after loading.

    As a division of Warehouse Equipment & Supplies Co., Tampa Pallet Racks has been supplying and installing warehouse systems since 1997. We connect equipment selection with the CAD arrangement so the quoted arms and uprights correspond to the material locations your production team expects.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    Cantilever warehouse racking holding steel tubing
    Cantilever rack storing lumber and wood products

    Protect access between storage and fabrication

    Show machine loading edges and production carts on the plan. An open rack face still needs an unobstructed approach for the bundle coming off it.

    light manufacturing
    parts distribution
    and fulfillment

    Recent Pallet Rack Projects

    A look at recent pallet rack installations across the Tampa Bay area.

    Selective pallet racking with wire decking in a warehouse

    Selective Pallet Racking

    Selective pallet racking fitted with wire decking across each level.

    Selective pallet racking with wire decking under a wood-truss roof

    Selective Racking with Wire Decking

    Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

    Carton flow racking with roller lanes

    Carton Flow Racking

    Pallet racking set up with carton flow roller lanes on the lower levels.

    Drive-in pallet racking with deep storage bays

    Drive-In Pallet Racking

    Drive-in pallet racking built with deep bays that store pallets several positions deep.

    Selective pallet racking with wire decking

    Selective Pallet Racking with Wire Decking

    Selective pallet racking fitted with wire decking across each level.

    Selective pallet racking in a warehouse

    Selective Pallet Racking

    Selective pallet racking installed across a warehouse.

    Selective pallet racking with wire decking

    Selective Pallet Racking

    Selective pallet racking fitted with wire decking.

    Selective pallet racking in a warehouse

    Selective Pallet Racking

    Selective pallet racking in a warehouse.

    Push back pallet racking with nested carts

    Push Back Pallet Racking

    Push back pallet racking with nested carts that store pallets several deep from one aisle.

    Selective pallet racking along a warehouse wall

    Selective Pallet Racking

    Selective pallet racking set up along a warehouse wall.

    Discuss your profile-storage drawing

    Call (813) 723-3771 to review material dimensions, truck access, and the transition from storage to production. Call (813) 723-3771.

    Tampa Pallet Racks

    7402 N 56th St.

    Ste 355-580

    Tampa, FL 33617

    (813) 723-3771

    Monday - Friday: 7:00 AM - 7:00 PM

    We respect your privacy. Your information will never be shared.

    Questions before ordering profile storage

    Nearby Areas We Also Serve

    Our delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.

    Tampa Pallet Racks

    Address

    7402 N 56th St.
    Ste 355-580
    Tampa, FL 33617

    Business Hours

    Monday - Friday: 7:00 AM - 7:00 PM
    Saturday: Closed
    Sunday: Closed

    Need Cantilever Rack in Clearwater?

    Call (813) 723-3771 or request a quote and we will get a layout started.

    (813) 723-3771
    Call Now