Serving the Tampa Bay Area
    Cantilever Rack warehouse storage system
    Brandon, Florida

    Cantilever Rack in Brandon, FL

    Cantilever rack gives Brandon contractor suppliers an open loading face for pipe, trim and other material that extends beyond a pallet footprint. Horizontal arms project from upright columns, with no front columns dividing the opening into narrow bays. A bundle can span several supports while remaining accessible from the aisle.

    Causeway Boulevard and Falkenburg Road serve regional distribution and service inventory operations where long stock can compete with outbound pallets. Separate supported levels let staff retrieve a particular length without first clearing a floor pile. Bar, tube, lumber and sheet products each require their own support and handling assessment.

    (813) 723-3771

    Cantilever racking versus pallet positions

    Selective pallet rack remains appropriate for boxed service parts and palletized replenishment because each pallet has a defined position between frames. Cantilever racking addresses a different geometry: material rests across projecting arms instead of depending on a pallet spanning paired beams. Keep both storage formats where the inventory warrants them.

    Tampa Pallet Racks operates as a division of Warehouse Equipment & Supplies Co.; the business has been supplying and installing storage systems since 1997. We connect component selection to the actual long-load list rather than choosing arms solely from an overall bundle weight.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    Cantilever warehouse racking holding steel tubing
    Cantilever rack storing lumber and wood products

    Room for regional dispatch

    For a regional distributor, protect pallet staging before extending a long-stock run. Mark where a full-length bundle waits during order checking, so neither the truck approach nor the arm face becomes a temporary packing station.

    e-commerce
    regional distribution
    and service inventory

    Cantilever rack arms and bearing points

    A useful arrangement starts with the bearing surfaces and works outward to the upright, base and travel aisle.

    1

    Match depth to the bundle

    Arm length must support the intended load depth without leaving material beyond the specified bearing area. Record the distance from the upright to the outer edge of the bundle, including packaging that changes how it sits. Arm tips are not extra storage depth.

    2

    Distribute weight across supports

    Arm capacity applies under stated loading conditions, not to any weight placed anywhere along the arm. Check how the heaviest bundle bears on each support; uneven bundles may concentrate force instead of dividing it equally. Upright and base ratings also limit the assembled arrangement.

    3

    Place columns for every length

    Support spacing follows material stiffness and the shortest as well as longest stock. A long pipe bundle may bridge several arms, while a short offcut could miss a support entirely. Review allowable overhang and deflection rather than applying one spacing rule to every product.

    4

    Choose the working faces

    Single-sided rows can occupy a perimeter position; double-sided rows need working access on both faces. Include projecting bases when measuring the footprint. A wall behind the rack does not replace its specified structural assembly or provide an assumed connection.

    Planning a cantilever storage rack installation

    For forklift handling, model the entire load as it turns into the aisle, including its ends beyond the forks. A side-loader carries long material differently and can change the aisle arrangement, but its dimensions and lifting limits still govern. Reserve vertical space for raising a bundle clear of arms before withdrawal.

    Indoor storage and outdoor placement call for separate reviews of exposure, finish and the specified anchoring arrangement. Round pipe may need inclined arms or suitable stops; sheet goods may require additional manufacturer-approved support. Experienced installation crews are scheduled and managed to assemble bases, align uprights, attach bracing and position arms to the agreed drawing.

    Brandon warehouse racking · Long-load support options · FIFO pallet storage in Brandon · Bulk pallet lanes in Brandon

    Contractor pipe separated by diameter and dispatch length
    Trim and lumber bundles with defined bearing points
    Sheet inventory needing a specified support surface
    Call (813) 723-3771

    Recent Pallet Rack Projects

    A look at recent pallet rack installations across the Tampa Bay area.

    Selective pallet racking with wire decking in a warehouse

    Selective Pallet Racking

    Selective pallet racking fitted with wire decking across each level.

    Selective pallet racking with wire decking under a wood-truss roof

    Selective Racking with Wire Decking

    Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

    Carton flow racking with roller lanes

    Carton Flow Racking

    Pallet racking set up with carton flow roller lanes on the lower levels.

    Drive-in pallet racking with deep storage bays

    Drive-In Pallet Racking

    Drive-in pallet racking built with deep bays that store pallets several positions deep.

    Selective pallet racking with wire decking

    Selective Pallet Racking with Wire Decking

    Selective pallet racking fitted with wire decking across each level.

    Selective pallet racking in a warehouse

    Selective Pallet Racking

    Selective pallet racking installed across a warehouse.

    Selective pallet racking with wire decking

    Selective Pallet Racking

    Selective pallet racking fitted with wire decking.

    Selective pallet racking in a warehouse

    Selective Pallet Racking

    Selective pallet racking in a warehouse.

    Push back pallet racking with nested carts

    Push Back Pallet Racking

    Push back pallet racking with nested carts that store pallets several deep from one aisle.

    Selective pallet racking along a warehouse wall

    Selective Pallet Racking

    Selective pallet racking set up along a warehouse wall.

    Cantilever rack: price the long-stock arrangement

    Send load lengths, heaviest weights, clear height and a building plan for a free CAD layout and itemized quote. Call (813) 723-3771 to discuss the proposed storage faces. Call (813) 723-3771.

    Tampa Pallet Racks

    7402 N 56th St.

    Ste 355-580

    Tampa, FL 33617

    (813) 723-3771

    Monday - Friday: 7:00 AM - 7:00 PM

    We respect your privacy. Your information will never be shared.

    Questions before choosing arms

    Nearby Areas We Also Serve

    Our delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.

    Tampa Pallet Racks

    Address

    7402 N 56th St.
    Ste 355-580
    Tampa, FL 33617

    Business Hours

    Monday - Friday: 7:00 AM - 7:00 PM
    Saturday: Closed
    Sunday: Closed

    Need Cantilever Rack in Brandon?

    Call (813) 723-3771 or request a quote and we will get a layout started.

    (813) 723-3771
    Call Now