
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Carton flow rack in Brandon gives mixed-case e-commerce orders a defined picking face while replacement cases enter from the opposite side. Inclined rollers advance compatible cartons or totes by gravity as the leading container leaves. The practical benefit is less reaching into a receding row, not a promised increase in orders per shift.
A wave can empty several popular items together, so lane allocation should follow the order mix rather than equal spacing across every bay. Reserve room for rear replenishment before committing the front aisle to carts, packing benches, or a takeaway conveyor.
An e-commerce pick module needs enough distinct faces for the items appearing together in an order wave. Repeated fast movers may justify adjacent lanes, while occasional items may remain on static shelves. Wider lanes consume face count, making carton dimensions as important as the number of active SKUs.
Tampa Pallet Racks operates as a division of Warehouse Equipment & Supplies Co., supplying and installing rack since 1997. Our planning separates the gravity picking levels from any pallet reserve above them so both handling methods are represented in the layout.


E-commerce and regional distribution activity around Causeway Boulevard and Falkenburg Road makes the relationship between replenishment and packing worth mapping carefully. Use your own receiving routes and outbound staging locations to choose lane orientation; proximity to a truck corridor does not determine which side of a bay should face the picker.
Check the complete path from receiving container to picked case before settling on lane depth or roller spacing.
Measure the smallest footprint and inspect its underside for seams, tape ridges, and sagging panels. Roller contact must support the actual container through the entire lane, including a partly filled tote returning to the picking face.
Set lane widths around the loaded case rather than its printed nominal dimensions. Dividers guide cartons toward their assigned front positions, with enough clearance to prevent binding but not so much that narrower boxes can turn sideways.
Load replacement cases at the elevated rear entrance and remove orders at the lower front edge. This front-pick, rear-replenish arrangement supports FIFO within each lane when receiving staff preserve the intended receipt sequence.
Choose incline and roller arrangement together, then check light and heavy examples. Cases should advance to the front restraint without stalling or striking it excessively; labels and front openings must remain readable when neighboring lanes are full.
A pallet bay retrofit starts with upright identification, beam connections, support requirements, and the combined proposed loads. Existing bay width alone does not establish compatibility. Show the elevations needed for cartons, hands, and replenishment access, and verify the reserve-pallet arrangement independently before adding picking levels below it.
Experienced installation crews are scheduled and managed around the approved work sequence. Installation includes positioning flow supports, setting dividers, and checking representative cases through loaded lanes. Wave simulation should include a rapidly depleted face, a neighboring full lane, and replenishment arriving while a picker works at the front.
Brandon warehouse racking · Case and tote picking options · FIFO pallet reserve in Brandon · LIFO reserve lanes in Brandon
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Send case and tote dimensions and weights, clear height, a floor plan, and building size for a free CAD layout and itemized quote. Include wave quantities and your preferred replenishment route so carton flow rack capacity reflects the work between refills. Call (813) 723-3771 to discuss the package. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Two to six pallets deep from one aisle, without giving up much reach.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.