
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Pushback rack in Temple Terrace can concentrate recurring component pallets while leaving more of the working footprint for assembly and order preparation. A lane holds two to six pallets deep, with each depth justified by the number of compatible pallets normally available for that SKU.
Technology supply and service distribution often combine a few repeated pallet loads with many small inventory lines. Cart lanes reduce reserve aisles; selective positions retain access to the varied assortment.
Pallet footprint, overhang, loaded height, and weight range determine cart suitability and clearances. We compare shorter lanes with deeper alternatives against actual pallets per SKU, retaining enough independent faces for the assortment that feeds assembly or service orders. FIFO components belong in a different arrangement that respects the required release sequence.
The specification coordinates frame spacing with the beam pair per level, rail supports, and loaded movement envelope. Beam elevations and capacity requirements follow the complete storage assembly; choosing a familiar beam dimension alone does not establish that the mechanism will fit. Check frame capacity from its height and the vertical distance between beam levels. A suitable rating for a single beam pair cannot establish the complete upright capacity; document accepted loads on the load plaques.
Any new addition requires verification of the existing upright connection and matching beam connectors. Installation crews are scheduled and managed to the agreed sequence, with checks on cart nesting, rail alignment, and loaded travel before routine use.
Temple Terrace warehouse racking · Pushback system options · FIFO lanes in Temple Terrace · Deep reserve storage in Temple Terrace
A large receipt does not necessarily justify six-deep storage. If assembly quickly consumes four, most of that assigned lane remains empty. We compare delivery quantities, production drawdown, and the number of SKUs requiring separate faces before deciding depth.
A selective layout lets the operator choose any pallet directly, at the cost of more access aisles. Compared with drive-in storage, nested-cart lanes keep the lift truck outside the rack. The choice depends on handling requirements as well as the number of stored pallets.
The business is a division of Warehouse Equipment & Supplies Co., with Tampa Pallet Racks supplying and installing since 1997. We translate component and pallet data into a lane arrangement that distinguishes reserve capacity from the space your operation needs for active work.


Near Fowler Avenue, preserve movement between reserve faces and the spaces where kits are prepared. Telecom Park technology operations may need separate addresses for component revisions. For north Tampa facilities using I-75 or I-275 connections, receiving patterns help determine where new lanes face and which work areas remain available during installation.
Inclined rails support a sequence of nested carts, creating multiple storage positions behind one working face. Each arrival changes the withdrawal order.
The first pallet sits on the available front cart. Its bottom construction, dimensions, and loaded weight must fit the specified equipment, including differences between vendor and assembly pallets.
Placing a further pallet advances the occupied carts away from the aisle. The cart set unfolds along the rails as positions fill, rather than requiring a forklift to travel inside a deep storage lane.
When the front pallet is withdrawn, the incline returns the remaining loaded carts toward the aisle. The operator manages the withdrawal so the load train advances in a controlled manner and presents the next pallet correctly.
LIFO retrieval means a newly placed pallet stands ahead of older stock in the same lane. Revision-sensitive parts and mandatory oldest-first supplies need separate access arrangements instead of being buried behind current receipts.
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Identify the components held in repeated pallets and the space needed for kit preparation; we can provide a free CAD design and itemized quote. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Cases advance to the picker instead of the picker hunting for cases.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.