
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Pushback rack in Tampa can put repeated reserve pallets behind fewer aisle faces while preserving access to separate SKU lanes. The usual range is two to six pallets deep, but the right depth depends on inventory remaining between receipts rather than a single busy shipment.
A regional distributor may need deep packaging reserves beside individually accessible service items. We distinguish those storage jobs first, then compare the footprint of nested carts on inclined rails with conventional rows that give every pallet its own approach.
Nested carts travel on inclined rails, creating multiple storage positions behind one face and a predictable withdrawal sequence.
The aisle-side cart receives the initial load. Confirm pallet footprint and underside support before adopting a lane assignment, including packaging overhang.
Each further pallet displaces the loaded carts backward as the driver advances at the face. The rails guide cart travel, and the nesting arrangement accommodates successive positions without extending the forklift into the storage block.
Withdrawing the accessible pallet allows the remaining loads to roll forward by gravity. Operators need a controlled handling sequence that accounts for the combined moving load and leaves the next pallet correctly presented for pickup.
LIFO means the most recently received pallet in that lane leaves first. Where batches must remain distinct, assign separate lanes and record the allocation rather than expecting a deep lane to provide selective access.
Density comes from reducing aisle count, not from making every product share one retrieval pattern. Allocate repeated, LIFO-compatible pallets to deeper lanes while leaving small quantities and restricted lots where operators can retrieve them without clearing newer stock first.
Selective rack allows direct pallet selection across a varied inventory. Drive-in can hold deep quantities but sends the truck into the lane. Cart-based storage provides lane-face access without that entry, although the rear pallets still remain unavailable until the front positions clear.
Tampa Pallet Racks is a division of Warehouse Equipment & Supplies Co.; supplying and installing since 1997 informs our approach to matching inventory with equipment. Your proposal identifies lane quantities and structural components separately for initial blocks and additions.


East Tampa and Orient Park distribution layouts need reserve faces that do not consume receiving staging. Along Adamo Drive, connections toward the Selmon Expressway, I-4, and I-75 can influence dispatch patterns, but internal truck paths still determine rack orientation. Airport/Westshore operations may need a different balance between compact reserves and mixed-order preparation.
Planning starts with pallets per SKU, replenishment frequency, and the loaded dimensions and weight range. Comparing two-, three-, and deeper lane arrangements shows how many separate faces remain available when a storage block gains additional depth. Keep FIFO lines in a storage pattern that serves the earlier receipt before newly replenished pallets.
We specify the beam pair per level together with the frame spacing required by the rail-and-cart assembly. Capacities, support points, connector configuration, and vertical clearances are evaluated as one arrangement; changing beam length can affect more than the width of a bay. Frame capacity changes with upright height and vertical spacing between beams. Evaluate the summed storage loads separately from each beam pair rating, then use load plaques to identify the accepted configuration.
For new additions, confirm existing upright identification and connection matching before ordering adjoining components. We schedule and manage installation crews around the agreed work areas, then arrange alignment and loaded travel checks with pallets representative of the intended inventory.
Tampa warehouse racking · Pushback system options · FIFO lanes in Tampa · Deep reserve storage in Tampa
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Share a measured warehouse plan, loaded pallet details and active SKU balances for a free CAD proposal and clearly separated project pricing. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Cases advance to the picker instead of the picker hunting for cases.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.