
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Carton flow rack in Temple Terrace gives technology and assembly kits separate component queues instead of a shared pile of replenishment containers. Inclined rollers bring cases or suitable totes toward front picking positions while replacement stock enters from behind the working face.
Technology supply and light manufacturing near Telecom Park and Fowler Avenue provide a practical setting for this arrangement. Kit builders need the right component within reach, while replenishment staff need an independent route that does not interrupt the sequence of selections at the assembly area.
A case flow rack can feed a picking module without replacing the assembly process itself. We review where empty totes leave, how replenishment containers arrive, and whether the operator picks individual packaged items or removes complete cases. Those decisions influence level spacing and reach before the total lane count is settled.
Retrofit pallet rack bays require a review of the supporting structure, flow attachments, and intended loads. Beam positions and available clearances determine whether the proposed component levels fit the existing framework. Adding roller beds does not by itself establish that the complete bay can carry the planned arrangement.
Lane dividers should separate similar components without pinching their containers. Tote feet and runners need continuous suitable support, and light cartons must advance without routine manual pushing. Where packaging or weight varies, representative travel checks help establish the roller configuration and incline needed for consistent presentation.
We arrange installation through experienced installation crews whose work is scheduled and managed around the agreed sequence. The handover discussion includes rear loading assignments, front identifiers, and how operators should flag a container that does not move as intended.
Temple Terrace warehouse racking · Case and tote picking options · FIFO pallet reserve in Temple Terrace · LIFO reserve lanes in Temple Terrace
Our starting point is the component package rather than the finished kit. Small cartons, divided totes, and larger supply cases may need different lane widths or roller support. Giving every component the same face width can waste room and make neighboring labels harder to distinguish during repeated selections.
For this planning work, Tampa Pallet Racks draws on its role as a division of Warehouse Equipment & Supplies Co., supplying and installing warehouse systems since 1997. We assess which components suit gravity presentation and which should remain in other controlled storage arrangements.


Telecom Park and the Fowler Avenue corridor support technology supply, service inventory, and light-industrial activity near the USF area. A component picking module is useful where those operations assemble recurring kits, but its footprint should leave room for work in progress rather than treating every available opening as storage capacity.
Carton flow racking provides a physical replenishment queue for kit components, with FIFO supported by rear loading and front withdrawal. Lot selection and component verification still require an operating method that agrees with the lane arrangement.
Replenishment staff match each container to its designated lane before placing it behind the components already waiting for selection.
Gravity carries cartons or compatible totes toward the assembly face while dividers prevent neighboring component queues from drifting together.
Kit builders withdraw the required packaged components or remove an empty container, allowing the next replenishment unit to advance toward them.
Adding new stock behind existing containers supports FIFO within the lane, while separate lot rules govern choices between multiple available queues.
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Provide carton and tote dimensions, weight ranges, clear height, and building size or a floor plan. Add the component list and kit-picking sequence so we can prepare a free CAD layout and itemized quote showing container presentation, replenishment access, and the proposed module scope. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Two to six pallets deep from one aisle, without giving up much reach.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.