
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Pushback rack helps Riverview fulfillment buildings distinguish deep reserve from the floor space needed to assemble delivery routes. Repeated pallets can occupy lanes 2–6 pallets deep instead of spreading across single-deep rows. Nested carts run on inclined rails, allowing several positions behind one aisle-facing opening with fewer aisles between storage blocks.
The trade is access: the last pallet loaded is the first available for retrieval. LIFO reserve works differently from selective picking, where every pallet has direct access. Before allocating a block near receiving, establish which recurring items have enough matching pallets and which mixed orders must remain immediately reachable.
Provide normal and peak pallets per SKU, load weights and the space reserved for route assembly. Lane depth should reflect the stock held between replenishments. A shorter lane can be preferable when deeper storage would replace openings needed for additional recurring items. FIFO route inventory should remain outside this LIFO reserve allocation.
We establish each beam pair per level and verify frame spacing, beam spacing and the resulting assembly capacity. Cart loads and rail reactions must be included. Matching existing rack requires confirmed component identity and an accepted configuration, not simply beams that appear to fit. The beam pair rating belongs to one level; the upright rating depends on frame height and vertical beam separation. Both must support the agreed load plan, which is then identified on load plaques.
New material is specified for the agreed structure and moving assemblies. Installation crews are scheduled and managed with defined work boundaries and receiving access. Alignment, pallet support and loaded travel checks form part of readiness review, followed by instructions for controlled loading and unloading.
Riverview warehouse racking · Pushback system options · FIFO lanes in Riverview · Deep reserve storage in Riverview
A lane is an inventory commitment as well as a storage location. Its loading order should be clear before operators begin moving recurring route stock into depth.
Allocate an item with suitable pallet quantities and a compatible rotation rule. Label the location so incoming loads do not conceal a different SKU or a batch requiring separate retrieval.
The initial pallet occupies its designated support at the front. Later pallets push loaded carts uphill, with nested cart positions accommodating the chosen depth behind the aisle opening.
The truck removes the front pallet from outside the structure. Remaining carts roll forward under controlled withdrawal, presenting the next load without driving down a storage tunnel.
A fresh receipt sits ahead of older pallets. If a route needs a particular buried load, the storage assignment is wrong; change the lane allocation or retain individual access.
We treat reserve replenishment and vehicle loading as separate movements on the drawing. Added density is useful only if the front handling aisle remains workable when orders accumulate. Counting positions without mapping that transfer can leave the same dispatch bottleneck in another location.
Tampa Pallet Racks, a division of Warehouse Equipment & Supplies Co., has been supplying and installing since 1997. For this application, we connect the rack specification to recurring route inventory, pallet construction and the lift equipment used to replenish the picking area.
Existing selective rows need not disappear. Retain them for fragmented stock or orders requiring direct pallet selection, then assign concentrated reserve to deeper lanes. Compare drive-in as well, recognizing that its truck-entry handling differs from the aisle-side cart arrangement.


For Riverview and nearby Gibsonton, US-301, I-75 and Big Bend Road help frame delivery access, but interior transfers still need their own space. Show where reserve leaves the rack, where mixed orders form and where route pallets wait so a denser block does not absorb dispatch preparation areas.
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Show your route-building area and replenishment stock; we will prepare a free CAD drawing and quote each agreed part of the new rack scope. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Cases advance to the picker instead of the picker hunting for cases.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.