
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Carton flow rack in Riverview can keep recurring route items at assigned front positions while dispatch staff assemble mixed-case deliveries. Cases or compatible totes enter an inclined roller lane from the rear, then gravity moves the queue forward as containers leave. Route assembly benefits from a predictable picking location rather than a promise about vehicle loading speed.
The module should feed route carts or assembly positions without becoming the route staging area itself. Separate space for completed orders from the front picking aisle, and keep incoming replenishment clear of the rear lane entrances. Otherwise the gravity mechanism may work while both approaches become congested.
A route picking module needs controlled container movement and a legible lane assignment before the first order is assembled.
Provide the outside dimensions and loaded weights of each case or tote family. Check underside ribs, seams, and any bowed panels because roller contact follows those surfaces rather than the label description, especially when partly filled containers return for another picking cycle.
Allocate lane widths to the container envelope, leaving clearance for movement without allowing cases to yaw across the bed. Dividers preserve item separation, and front labels should match the route assembly list without being concealed by the leading container.
Load the raised rear end in receipt order and withdraw from the lower front to support FIFO within each channel. When several channels serve one item, add a batch selection rule so a newer parallel lane does not bypass an earlier receipt.
Test gravity advance with a nearly empty lane as well as a full queue. Incline, roller arrangement, and front restraints must work together, allowing the next case to present without requiring an operator to reach deep inside the channel.
Map the items repeated across routes, not just total outbound volume. Popular cases may need several faces to bridge the pre-dispatch picking wave, whereas route-specific items may belong on shallower channels or static shelves. That choice balances usable carton positions against the number of distinct SKUs a picker must reach.
The supplying and installing experience behind Tampa Pallet Racks dates to 1997 through its role as a division of Warehouse Equipment & Supplies Co. For route assembly, we connect that equipment discussion to the actual front-pick and rear-replenish paths shown on your floor plan.


Last-mile distribution and fulfillment along US-301 and in nearby Gibsonton need case-picking faces that remain accessible during route assembly. A dispatch cutoff belongs in the demand discussion, but it does not establish a guaranteed picking rate. Use your route mix and cart movements to determine how much forward coverage each face requires.
A pallet bay retrofit can combine approved reserve storage with lower carton picking levels, but only after checking structure, flow attachments, and the proposed loads. Account for beam elevations, tote height, and hand access. Reserve handling and route carts also need operating space beyond the outline of the rack itself.
We arrange experienced installation crews and manage their scheduled work against the agreed installation sequence. Checks cover divider alignment, representative container travel, and the space needed at both lane ends. Include the route assembly positions in the handover drawing so later staging changes do not erase the intended replenishment access.
Riverview warehouse racking · Case and tote picking options · FIFO pallet reserve in Riverview · LIFO reserve lanes in Riverview
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Provide case and tote dimensions and weights, a floor plan, clear height, and building size for a free CAD layout and itemized quote. Mark cart assembly and completed-route staging so carton flow rack placement supports both picking and departure preparation. Call (813) 723-3771 with your container list and route-demand notes. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Two to six pallets deep from one aisle, without giving up much reach.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.