
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Cantilever rack in Ybor City organizes long fabrication and maintenance materials around open arm levels rather than a continuous floor stack. Uprights support the projecting arms, and bracing stabilizes the run without front columns crossing the loading face. Pipe, bar, tube, lumber, and sheet stock can have defined positions that remain accessible between deliveries.
Industrial supply and light manufacturing around Adamo Drive and the 22nd Street corridor occupy varied building footprints. Existing wall lines and interior columns make the route to the storage face as important as the row itself. Draw the longest load through that route before settling on orientation or aisle width.
A cantilever racking plan must preserve the intended access pattern. A single-sided run may align with a boundary while keeping the working face toward the aisle. A double-sided island can offer two picking faces where both approaches fit. Include the arms, loaded stock, and base projection in the footprint; a drawing showing only upright locations hides much of the occupied depth.
The cantilever rack configuration also needs a defined material location. Inside storage can suit finished sheet goods and moisture-sensitive lumber. Outdoor placement calls for components and finishes specified for the actual exposure and for handling wet packages. Pipe needs appropriate rolling restraint, and sheet packs need a support surface that addresses deflection rather than resting on widely separated arms by default.
Experienced installation crews are scheduled and managed to follow the agreed assembly sequence. Base placement, upright alignment, bracing, and arm elevations are set against the approved drawing. Any later change in support spacing or stored bundle weight should trigger a configuration review before the revised load enters the row.
Ybor City warehouse racking · Long-load support options · FIFO pallet storage in Ybor City · Bulk pallet lanes in Ybor City
The open face removes the front-post interruptions found in selective pallet rack, helping long pieces move across their support points. Selective bays remain appropriate for palletized parts and small packaged goods. A mixed layout should reserve each storage type for the material shape it supports, instead of treating long-stock arms as ordinary pallet beams.
Tampa Pallet Racks is the rack division of Warehouse Equipment & Supplies Co.; the business has been supplying and installing systems since 1997. Our planning connects the measured building layout with the loading pattern, keeping structural ratings and daily retrieval needs in the same discussion.


Buildings along Adamo Drive and the 22nd Street corridor can have receiving doors that do not line up with the best storage wall. Mark door openings, interior columns, and staging positions on the building plan. Follow the bundle from unloading to its assigned arms to expose tight turns before ordering.
Cantilever racking within an established floor plan needs matched arm projection, support intervals, weight limits, and unobstructed handling access.
List shortest and longest pieces, package depth, and bundle height. Arm length should support the intended depth without pushing material beyond the approved bearing position. Record how bundles change after opening, since loose sections may settle differently from tightly banded stock.
Choose upright intervals to suit bending behavior and minimum retained length. Stiff bar and flexible tube can need different support patterns. Check overhang at the ends and the number of arms beneath each package rather than spreading columns simply to fill the available wall.
The load reaching an individual arm depends on the bearing arrangement. Unbalanced packages may concentrate weight instead of sharing it evenly. The total demand on the upright and base also includes every loaded level in the specified single-sided or double-sided configuration.
A forklift needs room to turn and withdraw with the full material length clear of obstructions. A side-loader changes how that length travels, but still needs adequate operating space. Include lift clearance above each bundle so retrieval does not scrape the next level.
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Talk through your layout at (813) 723-3771. Include load lengths, heaviest weights, clear height, and a building plan to receive a free CAD layout and itemized quote identifying the proposed support arrangement and installation work. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Two to six pallets deep from one aisle, without giving up much reach.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Cases advance to the picker instead of the picker hunting for cases.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.