
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Carton flow rack in Plant City can present produce packing consumables beside assembly work without placing replacement cartons in the operator’s approach. Inclined rollers use gravity to advance cases or suitable totes after each front withdrawal. Loading at the rear separates replenishment access from the hand-picking face when the building layout provides both routes.
Packing supplies include containers with very different handling behavior: a dense case of labels does not move like a light carton of inserts. Establish which materials travel in their shipping case and which require a consistent tote before choosing a common lane arrangement.
Existing pallet bays may accept flow levels after their components, connections, and proposed combined loads are evaluated. Show any pallet reserve above the pick module separately, including beam elevations and access for replenishment. Packing benches cannot occupy the rear fill route simply because their height clears the front rollers.
Experienced installation crews are scheduled and managed to the agreed sequence for the packing support area. Installation checks include flow support alignment, divider positions, front restraints, and travel with the designated cases or totes. Give operators the lane map so seasonal supply substitutions do not silently change the handling specification.
Plant City warehouse racking · Case and tote picking options · FIFO pallet reserve in Plant City · LIFO reserve lanes in Plant City
Keep each packing material identifiable at the point of withdrawal, with lane dividers preventing neighboring cartons from drifting together. Labels, liners, and other repeat consumables may need different lane widths even when they feed the same packing task. A shared outside bay width should not force every container into the same opening.
Tampa Pallet Racks is the division of Warehouse Equipment & Supplies Co. supporting this planning work; the business has been supplying and installing rack since 1997. The proposed arrangement follows the consumables and their access needs rather than treating packing support as another full-pallet lane.


Agricultural packing and distribution near Airport Road and the I-4 / SR-39 interchange make packing-material access a useful planning focus. Base the layout on your own receiving entrance, workstations, and material issue pattern. Seasonal volume may change the quantity held in each channel without changing the need for a clear rear filling route.
Choose the container path before placing the module against a workbench or reserving an entrance for replenishment carts.
Check whether the package bottom stays flat when opened and partly emptied. Roller spacing must carry the container without letting corners dip between supports, while a tote may provide a more consistent contact surface for loose bags or small packing components.
Allow clearance for actual carton bulging, not only the dimensions on a supplier sheet. Dividers should guide the load without pinching it, and the front opening must let an operator grasp the intended case or withdraw contents without dragging adjacent packaging.
The elevated rear entrance receives new cases while picking takes place at the lower front. FIFO follows that lane sequence when earlier receipts are loaded first; material changes and batch distinctions still require visible identification rather than relying on gravity alone.
Use the lightest normal carton as well as a full one when checking the incline. A lane that moves dense cases may leave light consumables stationary, while excessive slope can send heavier packages into the front restraint with unnecessary force.
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Send dimensions and weights for your cases and totes, building size, clear height, and a floor plan to receive a free CAD layout and itemized quote. Mark packing stations and supply entry points so the carton flow rack proposal includes both material presentation and rear access. Discuss your requirements at (813) 723-3771. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Two to six pallets deep from one aisle, without giving up much reach.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.