
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Carton flow rack in Tampa supports regional mixed-case fulfillment by presenting replenished cartons at fixed front picking positions. Cases or compatible totes travel on inclined rollers from a rear loading aisle, helping separate the person feeding stock from the person building an outbound order.
Regional distribution around East Tampa and the Adamo Drive corridor involves more than storing inbound freight. Orders combine different lines, quantities, and package sizes, so the picking layout must provide enough distinct faces while keeping the most frequently selected cases within a practical working range.
A case flow rack turns rear replenishment into a visible queue for front withdrawal. The method supports FIFO within correctly operated lanes, but it does not decide how separate batches or multiple lanes of the same item are prioritized.
Stock handlers load designated rear openings while the front aisle remains available for assembling orders from multiple product lines.
Inclined rollers carry compatible bases forward, and dividers keep the moving queue aligned with the correct product identification.
After a picker removes the leading container, the remaining queue advances toward the front restraint for the following order selection.
Loading behind existing stock and withdrawing from the front supports FIFO within a lane, with separate rules needed across parallel queues.
We examine the sequence in which mixed orders are assembled before distributing lanes across a module. Related lines may belong near each other, but a heavy case should not force awkward handling simply because its product category sits beside lighter goods. Picking speed depends on usable presentation as much as proximity.
Tampa Pallet Racks brings the supplying and installing experience maintained since 1997 by its parent operation, Warehouse Equipment & Supplies Co., of which it is a division. We connect the proposed forward stock to replenishment frequency instead of assuming every active item needs the same lane depth.


East Tampa distribution buildings and the Adamo Drive corridor provide an operating context for mixed-case shipping alongside manufacturing and port-related freight. A dedicated picking face can separate that repetitive order work from reserve handling, provided the floor plan preserves access for both activities rather than squeezing one into the other.
Carton flow racking can fit within suitable pallet rack bays when the structure and component connections support the proposed arrangement. A retrofit review considers beam elevations, flow-level spacing, container reach, and any reserve loads above. The drawing should distinguish case-picking levels from pallet storage positions.
Roller selection starts with the bottom of the package, including tote runners, carton seams, and the possibility of soft bases. Lane widths and dividers then provide clearance without letting containers skew across neighboring lines. An appropriate incline should move the lightest intended case while controlling presentation of heavier loads.
Pick modules also need room for order containers and travel between faces. A dense row loses practical value if completed cases block the next selection or replenishment staff cannot reach the rear. We consider the route from reserve withdrawal through lane filling to outbound order consolidation.
Installation is scheduled and managed with experienced installation crews against an agreed sequence. Container travel checks and lane identification are included in the working discussion so the finished arrangement can be evaluated with the same package types used during normal fulfillment.
Tampa warehouse racking · Case and tote picking options · FIFO pallet reserve in Tampa · LIFO reserve lanes in Tampa
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Send us carton and tote sizes, weights, available clear height, and building size or a floor plan. Include a representative mixed-order profile and replenishment approach for a free CAD layout and an itemized quote that explains the proposed lanes and picking levels. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Two to six pallets deep from one aisle, without giving up much reach.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.