
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Carton flow rack in Port Tampa Bay separates industrial supply cases into identifiable lanes while palletized freight remains in reserve or staging. Rear loading feeds inclined rollers, and front picking gives order assemblers direct access to the next available carton or compatible tote.
Hooker’s Point and Ybor Channel connect freight activity with warehouses handling inland distribution and industrial supplies. In that setting, a case-picking module should organize broken-pallet inventory without treating receiving space as permanent storage or letting similar supply items share an indistinct picking position.
A case flow rack should be specified from actual container bases and working weights. Dense hardware cartons can behave differently from light packaged consumables on the same incline. Roller contact, support spacing, and discharge restraint need to suit the range, not merely an average case selected for convenience.
For retrofit pallet rack bays, we review the existing structure and proposed support connections before locating flow levels beneath reserve stock. The layout must show replenishment access behind the module and a picking route that does not become overflow space for inbound pallet loads.
Lane widths and dividers determine whether adjacent industrial supplies stay distinct during movement. Adjustable arrangements can accommodate changing package footprints, but each revised configuration still needs suitable support and a clear assignment. Deeper lanes are useful only where replenishment quantities justify occupying that much forward space.
Experienced installation crews are scheduled and managed around the agreed installation sequence. Representative cases and totes are checked for travel and front presentation, with attention to light containers that hesitate and dense packages that advance too forcefully.
Port Tampa Bay warehouse racking · Case and tote picking options · FIFO pallet reserve in Port Tampa Bay · LIFO reserve lanes in Port Tampa Bay
Carton flow racking belongs between reserve handling and order assembly, not in place of either activity. The operating sequence below keeps each supply line identifiable while gravity brings its next container within reach.
Each stocked line receives a designated opening so similar industrial cases remain physically separated throughout replenishment and withdrawal.
The loader places compatible containers behind the existing queue, preserving the intended oldest-first sequence without entering the front picking route.
Supported cartons or totes roll toward the discharge face as space becomes available, with dividers guiding their direction through the bay.
Order assemblers remove the leading case while the following container advances, supporting FIFO when replenishment and picking follow the assigned directions.
Industrial assortments often contain packages that look alike despite holding different grades, sizes, or applications. We plan individual faces and readable identification so a picker can distinguish neighboring lines without lifting one case to inspect another. Physical lane separation complements the order checking process rather than replacing it.
As a division of Warehouse Equipment & Supplies Co., Tampa Pallet Racks has been supplying and installing storage systems since 1997. Our planning distinguishes the smaller containers that belong in gravity picking lanes from pallet loads that require a different storage arrangement.


Port-related freight support and industrial supply require different handling decisions even when they share one building. Around Hooker’s Point and Ybor Channel, preserving the distinction between pallet staging and case picking is especially useful when inbound quantities exceed the smaller amounts released on daily supply orders.
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Share carton or tote sizes, working weight ranges, clear height, and building size or your floor plan. Add the case quantities normally released from reserve, and we will develop a free CAD layout with an itemized quote for the proposed picking module. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Two to six pallets deep from one aisle, without giving up much reach.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.