
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Pushback rack in Palm Harbor is aimed at compact warehouses where fast-moving supplies arrive several pallets at a time. Nested carts on inclined rails let a single lane hold two to six pallets, loaded and unloaded from the aisle.
Businesses along US-19 and Alderman Road in North Pinellas often run smaller buildings with tighter columns. Pulling reserve into lanes removes aisles and leaves more room for the service work happening in the same space.
Four parts explain the whole system. Push back racking keeps pallets moving by gravity after retrieval, so pallet undersides and load stability matter. Record overhang and bottom-board arrangement before selecting carts. Operators should withdraw loads under control and keep unsuitable pallets out of the lanes.
One truck approach serves every position in the lane, so the aisle count falls.
The unloaded cart set nests at the aisle face; incoming pallets move the supported carts away from that face into their working positions.
After a pallet comes out, gravity rolls the next one forward to the face.
Rails rest on a beam pair at every level, and frame capacity sets the total load each bay carries.
List your fastest items and how many pallets of each you hold. Lane depth should be checked against that count, because a longer lane leaves rails idle and a shorter one wastes the face. Compare normal counts with delivery peaks rather than sizing every lane for the largest receipt. Two short lanes can leave more usable faces than one deep lane, especially when service inventory changes from week to week. Use FIFO storage where receipt dates decide the withdrawal order rather than item interchangeability.
Drive-in offers another deep-storage arrangement, but forklifts enter its structure. Compare the entry maneuver with aisle-side handling before selecting the reserve pattern for a busy service building.
For future phases, match frame and beam type to the installed rack. We document everything so new lanes join without a mismatch. Installation crews are scheduled and managed with route loading considered in the work sequence. Beam spacing deserves a separate check: increasing the gap between levels may lower frame capacity. The beam pair must support its own level, while the upright must support the combined load at the proposed elevations.
Palm Harbor warehouse racking · Pushback system options · FIFO lanes in Palm Harbor · Deep reserve storage in Palm Harbor
In a small warehouse, every aisle is rent. Replacing several single-deep rows with lanes can recover floor without changing the building or the forklift. Selective rack still wins for variety because every pallet can be reached directly. Pushback rack makes sense only where repeated quantities justify sharing that access face.
Tampa Pallet Racks is the rack division of Warehouse Equipment & Supplies Co., supplying and installing since 1997. Each proposed lane uses new equipment selected for the pallet dimensions and loaded weight you provide.
We stay honest about the tradeoff. LIFO lanes release the newest pallet first, so only items that tolerate that rule go in, and the rest stay at selective faces.


With US-19 and Alderman Road feeding local delivery routes, space near the dock is precious. Dense lanes help keep staging clear while reserve stays within easy reach. Contractor supply buildings need a clear path between reserve retrieval and vehicle loading, not just more marked pallet positions.
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Describe the contractor supply mix and vehicle loading area; a free CAD drawing and detailed quote can show the proposed reserve arrangement. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Cases advance to the picker instead of the picker hunting for cases.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.