
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Pallet flow rack in St. Petersburg can organize repeated manufacturing inputs into FIFO lanes without treating every parts pallet as deep reserve. Around Gateway / Carillon and the 28th Street industrial corridor, electronics and light-manufacturing buildings often share floor space between assembly, receiving and shipping. A lane block must preserve those work boundaries and provide a separate approach at each rack face.
North St. Petersburg also connects to the broader Gateway industrial area, where tighter buildings make the position count sensitive to column spacing and forklift turns. We review repeat stock by SKU before pursuing depth. A compact gravity arrangement is useful only when its loading side remains reachable and its pick side serves the intended material path.
The lane hardware should be evaluated as a controlled travel system, not merely as rollers placed inside an existing bay. Pallet fit comes first.
Underside photographs show where the runners contact the roller tracks. Damaged bases, excessive load overhang and unstable stacks are excluded from the approved operating envelope.
Lane length follows the repeated inventory assigned to each face. Shorter lanes can preserve more SKU access when production carries moderate quantities of several different inputs.
Slope, brakes and speed controllers are selected as a coordinated arrangement. The light pallet that needs to advance and the heavy pallet that needs restraint are both part of the selection.
A separator can restrain following pallets during discharge where specified. The pick face needs fork clearance and a turning approach that does not cross the production footprint unnecessarily.
For St. Petersburg production stock, date control and material sequence can matter as much as volume. The first pallet loaded should be the first available at discharge within the assigned lane, but the lane map must still separate components and batches that require independent access. Selective storage can sit beside the flow block for less repetitive inputs.
A gravity flow rack review begins with pallet runner orientation, board spacing and both ends of the load-weight range. Electronics or manufacturing supplies may arrive on differing bases, so those differences are recorded before a common roller specification is proposed. Tampa Pallet Racks is a division within Warehouse Equipment & Supplies Co., a company supplying and installing warehouse equipment since 1997. We connect equipment choices with the drawing and crew coordination so the proposed reserve area remains workable alongside production.


Gateway / Carillon, the 28th Street industrial corridor and north St. Petersburg provide the manufacturing context. In tighter Pinellas buildings, we place the replenishment and discharge approaches around existing assembly and shipping areas instead of assuming every column bay is open storage.
A St. Petersburg pallet flow racking proposal starts with pallet size, heaviest load per level, clear height and building size. Add the forklift lift height, loaded pallet heights and a plan showing columns and production boundaries. Your free CAD layout identifies the exact lane positions, elevations and two-sided access; the itemized quote lists the structure and travel equipment separately.
Beam ratings apply per pair at each storage level; frame capacity depends on frame height and beam spacing. Approved capacities are recorded on load plaques, while roller and braking equipment must also suit the specified pallets. Existing-rack additions need connector review using upright-face, beam-end and label photographs. Similar teardrop patterns do not confirm that a conversion is appropriate.
New material supply is followed by installation through experienced crews we schedule and manage. Commissioning includes alignment and movement checks using representative loaded pallets. If rear access competes with assembly space and LIFO works for the input group, compare pushback instead. A carton-flow picking zone can handle repeated cases while the full-pallet reserve uses its own load and travel specification.
St. Petersburg warehouse racking · Gravity storage options · LIFO reserve in St. Petersburg · Case picking in St. Petersburg
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Show us where materials arrive and where production consumes them. We can compare the lane arrangement, identify pallet checks and explain the equipment included in the itemized quotation. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Two to six pallets deep from one aisle, without giving up much reach.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Cases advance to the picker instead of the picker hunting for cases.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.