
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Pallet flow rack in Plant City can keep strawberry and food-distribution pallets moving through a defined FIFO sequence rather than depending on operators to reach past newer deliveries. Buildings around the I-4 / SR-39 interchange and Plant City industrial park may need significant replenishment space during produce-handling activity. Dedicated receiving and withdrawal faces help separate that work when the building can provide both aisles.
The lane depth should reflect how produce batches are held, identified and dispatched. Large newer tilt-wall buildings offer room to compare several block arrangements, but building size alone does not decide the system. We examine pallet condition, batch quantities and cold-storage requirements before drawing positions into the reserve area.
Plant City agricultural packing and food distribution need a rotation plan that remains clear when stock levels change. A lane assigned to one item can still contain different arrival dates, so operators must load and withdraw according to an agreed batch method. Separate lanes may be needed when lots cannot be mixed or when a fast-moving item needs more than one accessible discharge face.
Pallet flow racking is a gravity system supported by rollers, with slope and braking selected for the intended loads. It can recover reserve volume in cooler buildings, provided both access aisles and waiting freight are accounted for. Since 1997, Warehouse Equipment & Supplies Co. has supplied and installed warehouse equipment; Tampa Pallet Racks is a division of that company. Our review connects the pallet and temperature specifications to lane assignments, the CAD drawing and the installation scope.


I-4 / SR-39 and Plant City industrial park anchor the local produce and cold-storage context. For packing operations, we align lane replenishment with the receiving area and reserve a discharge approach that does not become a holding zone for incoming batches.
Gravity flow rack for produce is specified around the load as it arrives, including its pallet base and the temperature in which it will travel.
Provide pallet dimensions, runner direction and weights from the lightest through the heaviest expected loads. Wrapped produce stacks also need a stable footprint that remains within the approved envelope.
Rollers and support spacing are chosen for the pallet underside. The slope and lane length work with brakes and speed controllers, so hardware selection precedes assumptions about reserve depth.
Where specified, a separator keeps following pallets from pressing against the load being removed. Receiving guides and rack guards support placement and reduce impact exposure at the working faces.
Cooler or freezer temperatures are supplied during selection, not after delivery. Loaded movement checks and the pallet acceptance rules should reflect the intended operating conditions before routine use.
For a Plant City layout, send pallet size, heaviest load per level, clear height and building size. Include lot handling rules, load height, forklift lift height and the location of docks and columns. A free CAD layout shows lane directions, both faces and the exact position count; an itemized quote identifies the structure, roller assemblies, braking equipment and selected protection.
Deeper lanes are compared with additional pick faces so the drawing reflects the produce inventory rather than just a total pallet count. Beam capacity applies per pair at each level, and frame capacity depends on height and beam spacing. Capacities are listed on load plaques. The roller and brake specification also accounts for the full pallet weight range, which may vary between packed products.
We supply new material and coordinate installation with experienced crews we schedule and manage. If current rack is proposed for conversion, upright-face, beam-connector and label photographs help establish compatibility before an addition is quoted. Pushback is an alternative for LIFO-compatible reserve, not a substitute for dated FIFO stock; carton flow can serve cases downstream while the full-pallet reserve retains its separate loading path.
Plant City warehouse racking · Gravity storage options · LIFO reserve in Plant City · Case picking in Plant City
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Provide your pallet examples, operating temperatures and batch quantities. We will use those details to compare a workable reserve arrangement and clarify the equipment included in the quote. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Two to six pallets deep from one aisle, without giving up much reach.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Cases advance to the picker instead of the picker hunting for cases.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.