
Selective Pallet Racking
Selective pallet racking fitted with wire decking across each level.

Warehouse relocation in Ybor City begins by checking whether existing bay lengths work between the receiving building’s columns. A larger room can still leave awkward row ends or obstruct an unloading route. The task is to assign usable components to a measured arrangement, not reproduce every old aisle.
Adamo Drive and 22nd Street provide local context for industrial suppliers occupying established East Tampa buildings. Door locations and column spacing can differ considerably between addresses. Those differences deserve attention before a dismantled row is assigned an unchanged destination footprint.
Pallet rack relocation may involve leaving some existing components outside the proposed arrangement when their dimensions do not suit the new grid. New compatible pieces can address specific gaps, subject to configuration and connection review. Similar appearance alone is not enough to justify combining systems.
Shipping phasing depends partly on how the building divides into workable installation areas. A column line may suggest a boundary, but doors and stock routes still need evaluation. We discuss which storage groups can transfer separately without guaranteeing uninterrupted dispatch through a constrained receiving area.
Warehouse relocation planning should distinguish an aisle drawn between rack faces from the usable passage around a column. Pallet overhang, equipment movements, and the unloading approach affect that passage. Bring those operating details into the drawing review before component purchases or transfer assignments are finalized.
Ybor City warehouse racking · Storage system moving scope · LIFO reserve in Ybor City · FIFO pallet lanes in Ybor City
Resolve the destination geometry while the original rack can still be documented in place. Four coordinated stages connect measurements, component identity, transfer groups, and the final arrangement around columns and doors.
Measure column positions, door openings, and usable handling paths alongside rack dimensions and inventory loads. Develop a new CAD destination layout that shows these fixed features explicitly. Compare alternative row lengths and orientations before deciding which assemblies belong in each part of the building.
Have inventory removed from the selected rows before teardown of unloaded bays. Label components to preserve their identities as assemblies are dismantled. Inspect members and connecting details, set damaged parts aside, and specify new replacements instead of assuming every removed piece belongs in the rebuilt arrangement.
Bundle components for the rows shown on the accepted drawing, keeping their identifiers visible. Coordinate transport with the available unloading route and the space allocated for assembly materials. Avoid placing bundles in the narrow passages that the layout intentionally leaves open around columns.
Establish row positions from the measured plan, then assemble the identified components with compatible new additions where required. The completed rack is anchored to the floor. Review the arrangement and load documentation before inventory is directed into the newly assigned storage areas.
A rack relocation should test several row arrangements against the fixed features that cannot move. We compare bay lengths, handling equipment, and loaded pallet dimensions with the column grid. A measured alternative may give existing assemblies a clearer role than forcing the previous layout into a different shell.
Within Tampa Pallet Racks, the division connection is Warehouse Equipment & Supplies Co., supplying and installing since 1997. Experienced crews are scheduled and managed using the accepted arrangement, with row locations established before bundles arrive at the receiving building.


For industrial supply moves around 22nd Street and Adamo Drive, the receiving building’s geometry is a useful starting point. A marked drawing of columns and doors helps explain why a familiar rack count may require a different arrangement at the next address.
A look at recent pallet rack installations across the Tampa Bay area.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective pallet racking fitted with wire decking across each level.

Selective pallet racking installed across a warehouse.

Selective pallet racking fitted with wire decking.

Selective pallet racking in a warehouse.

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective pallet racking set up along a warehouse wall.
Send a measured column grid, door locations, and current rack information for review. The warehouse relocation conversation can then focus on practical row arrangements instead of assuming the previous footprint will transfer unchanged. Call (813) 723-3771.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
(813) 723-3771Monday - Friday: 7:00 AM - 7:00 PM

Every pallet reachable, every time. The baseline we size everything else against.
View details
Two to six pallets deep from one aisle, without giving up much reach.
View details
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.
View details
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Cases advance to the picker instead of the picker hunting for cases.
View detailsOur delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.
Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.
7402 N 56th St.
Ste 355-580
Tampa, FL 33617
Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed
Call (813) 723-3771 or request a quote and we will get a layout started.