---
title: "Cantilever Rack in Ybor City, FL | Open-Arm Storage"
url: https://tampapalletracks.com/service-area/ybor-city/cantilever-rack
description: "Fit long fabrication stock into Ybor City industrial buildings. Review supports and truck paths with free CAD and a quote. (813) 723-3771."
lang: en
---

Image: Cantilever Rack warehouse storage system (https://tampapalletracks.com/__l5e/assets-v1/25012002-bee0-4c4a-be09-e866fca9aa7c/cantilever-rack-1.jpg)

Ybor City, Florida

# Cantilever Rack in Ybor City, FL

Cantilever rack in Ybor City organizes long fabrication and maintenance materials around open arm levels rather than a continuous floor stack. Uprights support the projecting arms, and bracing stabilizes the run without front columns crossing the loading face. Pipe, bar, tube, lumber, and sheet stock can have defined positions that remain accessible between deliveries.

Industrial supply and light manufacturing around Adamo Drive and the 22nd Street corridor occupy varied building footprints. Existing wall lines and interior columns make the route to the storage face as important as the row itself. Draw the longest load through that route before settling on orientation or aisle width.

(813) 723-3771

## Cantilever storage rack options and installation

A cantilever racking plan must preserve the intended access pattern. A single-sided run may align with a boundary while keeping the working face toward the aisle. A double-sided island can offer two picking faces where both approaches fit. Include the arms, loaded stock, and base projection in the footprint; a drawing showing only upright locations hides much of the occupied depth.

The cantilever rack configuration also needs a defined material location. Inside storage can suit finished sheet goods and moisture-sensitive lumber. Outdoor placement calls for components and finishes specified for the actual exposure and for handling wet packages. Pipe needs appropriate rolling restraint, and sheet packs need a support surface that addresses deflection rather than resting on widely separated arms by default.

Experienced installation crews are scheduled and managed to follow the agreed assembly sequence. Base placement, upright alignment, bracing, and arm elevations are set against the approved drawing. Any later change in support spacing or stored bundle weight should trigger a configuration review before the revised load enters the row.

Ybor City warehouse racking: https://tampapalletracks.com/service-area/ybor-city
·
Long-load support options: https://tampapalletracks.com/products/cantilever-rack
·
FIFO pallet storage in Ybor City: https://tampapalletracks.com/service-area/ybor-city/pallet-flow-rack
·
Bulk pallet lanes in Ybor City: https://tampapalletracks.com/service-area/ybor-city/drive-in-rack

Fabrication shops separating raw lengths from offcuts

Industrial suppliers organizing maintenance pipe by size

Distributors handling sheet packs alongside long timber

Call (813) 723-3771: (813) 723-3771

## Cantilever rack fit within established buildings

The open face removes the front-post interruptions found in selective pallet rack, helping long pieces move across their support points. Selective bays remain appropriate for palletized parts and small packaged goods. A mixed layout should reserve each storage type for the material shape it supports, instead of treating long-stock arms as ordinary pallet beams.

Tampa Pallet Racks is the rack division of Warehouse Equipment & Supplies Co.; the business has been supplying and installing systems since 1997. Our planning connects the measured building layout with the loading pattern, keeping structural ratings and daily retrieval needs in the same discussion.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Image: Cantilever warehouse racking holding steel tubing (https://tampapalletracks.com/__l5e/assets-v1/a9803396-6119-4d0a-9a67-20b504082c63/cantilever-rack-2.jpg)

Image: Cantilever rack storing lumber and wood products (https://tampapalletracks.com/__l5e/assets-v1/3bc24f26-3824-4b3c-b5d3-9f5952e32f4b/cantilever-rack-3.jpg)

### Adamo Drive and 22nd Street material routes

Buildings along Adamo Drive and the 22nd Street corridor can have receiving doors that do not line up with the best storage wall. Mark door openings, interior columns, and staging positions on the building plan. Follow the bundle from unloading to its assigned arms to expose tight turns before ordering.

industrial supply

light manufacturing

and distribution

## How cantilever racking is sized for fabrication stock

Cantilever racking within an established floor plan needs matched arm projection, support intervals, weight limits, and unobstructed handling access.

1

### Record the full load profile

List shortest and longest pieces, package depth, and bundle height. Arm length should support the intended depth without pushing material beyond the approved bearing position. Record how bundles change after opening, since loose sections may settle differently from tightly banded stock.

2

### Determine contact spacing

Choose upright intervals to suit bending behavior and minimum retained length. Stiff bar and flexible tube can need different support patterns. Check overhang at the ends and the number of arms beneath each package rather than spreading columns simply to fill the available wall.

3

### Verify arm and upright capacity

The load reaching an individual arm depends on the bearing arrangement. Unbalanced packages may concentrate weight instead of sharing it evenly. The total demand on the upright and base also includes every loaded level in the specified single-sided or double-sided configuration.

4

### Test the handling envelope

A forklift needs room to turn and withdraw with the full material length clear of obstructions. A side-loader changes how that length travels, but still needs adequate operating space. Include lift clearance above each bundle so retrieval does not scrape the next level.

## Recent Pallet Rack Projects

A look at recent pallet rack installations across the Tampa Bay area.

Image: Selective pallet racking with wire decking in a warehouse (https://tampapalletracks.com/assets/project-selective-orange-DLUjHNus.jpg)

### Selective Pallet Racking

Selective pallet racking fitted with wire decking across each level.

Image: Selective pallet racking with wire decking under a wood-truss roof (https://tampapalletracks.com/assets/project-wire-deck-kTFsAcd7.jpg)

### Selective Racking with Wire Decking

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Image: Carton flow racking with roller lanes (https://tampapalletracks.com/assets/project-carton-flow-BKsfA3I5.jpg)

### Carton Flow Racking

Pallet racking set up with carton flow roller lanes on the lower levels.

Image: Drive-in pallet racking with deep storage bays (https://tampapalletracks.com/assets/project-drive-in-DuLjm6zj.jpg)

### Drive-In Pallet Racking

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Image: Selective pallet racking with wire decking (https://tampapalletracks.com/assets/project-selective-green-B7G5EQA3.jpg)

### Selective Pallet Racking with Wire Decking

Image: Selective pallet racking in a warehouse (https://tampapalletracks.com/assets/project-warehouse-rows-4WW32Oc3.jpg)

### Selective Pallet Racking

Selective pallet racking installed across a warehouse.

Image: Selective pallet racking with wire decking (https://tampapalletracks.com/assets/project-high-density-BVVnZNJ0.jpg)

### Selective Pallet Racking

Selective pallet racking fitted with wire decking.

Image: Selective pallet racking in a warehouse (https://tampapalletracks.com/assets/project-warehouse-forklift-Cgd8blAg.jpg)

### Selective Pallet Racking

Selective pallet racking in a warehouse.

Image: Push back pallet racking with nested carts (https://tampapalletracks.com/assets/project-pushback-CcZMrTQ8.jpg)

### Push Back Pallet Racking

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Image: Selective pallet racking along a warehouse wall (https://tampapalletracks.com/assets/project-selective-wall--qV5jUgT.jpg)

### Selective Pallet Racking

Selective pallet racking set up along a warehouse wall.

View More Projects: https://tampapalletracks.com/projects

## Plan your Ybor City long-load storage

Talk through your layout at (813) 723-3771. Include load lengths, heaviest weights, clear height, and a building plan to receive a free CAD layout and itemized quote identifying the proposed support arrangement and installation work. Call (813) 723-3771.

### Tampa Pallet Racks

7402 N 56th St.

Ste 355-580

Tampa, FL 33617

(813) 723-3771

Monday - Friday: 7:00 AM - 7:00 PM

## Ybor City cantilever rack purchase checklist

### Can the run follow an interrupted wall line?

### Should I choose single-sided or double-sided arms?

### Can sheet packs share levels with bar stock?

### What information starts the quotation?

## Other Rack Types We Supply in Ybor City

### Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details
https://tampapalletracks.com/service-area/ybor-city

### Pushback Rack

Two to six pallets deep from one aisle, without giving up much reach.

View details
https://tampapalletracks.com/service-area/ybor-city/pushback-rack

### Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details
https://tampapalletracks.com/service-area/ybor-city/pallet-flow-rack

### Drive-In Rack

Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.

View details
https://tampapalletracks.com/service-area/ybor-city/drive-in-rack

### Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details
https://tampapalletracks.com/service-area/ybor-city/carton-flow-rack

## Nearby Areas We Also Serve

Our delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.

Cantilever Rack in Tampa: https://tampapalletracks.com/service-area/tampa/cantilever-rack
Cantilever Rack in St. Petersburg: https://tampapalletracks.com/service-area/st-petersburg/cantilever-rack
Cantilever Rack in Clearwater: https://tampapalletracks.com/service-area/clearwater/cantilever-rack
Cantilever Rack in Brandon: https://tampapalletracks.com/service-area/brandon/cantilever-rack
Cantilever Rack in Lakeland: https://tampapalletracks.com/service-area/lakeland/cantilever-rack
Cantilever Rack in Plant City: https://tampapalletracks.com/service-area/plant-city/cantilever-rack

View All Service Areas: https://tampapalletracks.com/service-area

## Where We Work

Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.

### Tampa Pallet Racks

#### Address

7402 N 56th St.
Ste 355-580
Tampa, FL 33617

#### Phone

(813) 723-3771

#### Business Hours

Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed

## Need Cantilever Rack in Ybor City?

Call (813) 723-3771 or request a quote and we will get a layout started.

(813) 723-3771

Call Now: 8137233771

## Structured data

```json
[
  {
    "@context": "https://schema.org",
    "@type": "LocalBusiness",
    "@id": "https://tampapalletracks.com/#business",
    "name": "Tampa Pallet Racks",
    "alternateName": "Tampa Pallet Racks - A Division of Warehouse Equipment & Supplies Co.",
    "description": "Industrial pallet racks and warehouse racking solutions in Ybor City, FL. Free warehouse design consultations, pallet rack installation, and warehouse storage optimization for Ybor City businesses.",
    "url": "https://tampapalletracks.com",
    "telephone": "(813) 723-3771",
    "address": {
      "@type": "PostalAddress",
      "streetAddress": "7402 N 56th St.",
      "addressLocality": "Tampa",
      "addressRegion": "FL",
      "postalCode": "33617",
      "addressCountry": "US"
    },
    "geo": {
      "@type": "GeoCoordinates",
      "latitude": "27.9506",
      "longitude": "-82.4572"
    },
    "areaServed": {
      "@type": "City",
      "name": "Ybor City",
      "containedInPlace": {
        "@type": "State",
        "name": "Florida"
      }
    },
    "openingHoursSpecification": [
      {
        "@type": "OpeningHoursSpecification",
        "dayOfWeek": [
          "Monday",
          "Tuesday",
          "Wednesday",
          "Thursday",
          "Friday"
        ],
        "opens": "07:00",
        "closes": "19:00"
      }
    ],
    "priceRange": "$$",
    "paymentAccepted": "Cash, Credit Card, Check",
    "image": "https://tampapalletracks.com/images/logo.png",
    "sameAs": [
      "https://facebook.com/tampapalletracks",
      "https://linkedin.com/company/tampapalletracks",
      "https://instagram.com/tampapalletracks"
    ],
    "hasOfferCatalog": {
      "@type": "OfferCatalog",
      "name": "Pallet Rack Systems",
      "itemListElement": [
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Selective Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Push Back Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Drive-In Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Warehouse Design Consultation"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Pallet Rack Installation"
          }
        }
      ]
    },
    "makesOffer": {
      "@type": "Offer",
      "itemOffered": {
        "@type": "Service",
        "name": "Pallet Rack Installation in Ybor City, FL",
        "serviceType": "Warehouse pallet racking and installation",
        "areaServed": {
          "@type": "City",
          "name": "Ybor City"
        },
        "provider": {
          "@type": "LocalBusiness",
          "name": "Tampa Pallet Racks",
          "telephone": "(813) 723-3771"
        }
      }
    }
  },
  {
    "@context": "https://schema.org",
    "@type": "Service",
    "@id": "https://tampapalletracks.com/service-area/ybor-city/cantilever-rack#service",
    "url": "https://tampapalletracks.com/service-area/ybor-city/cantilever-rack",
    "name": "Cantilever Rack in Ybor City, FL",
    "serviceType": "Cantilever Rack design, supply and installation",
    "description": "Cantilever rack in Ybor City organizes long fabrication and maintenance materials around open arm levels rather than a continuous floor stack. Uprights support the projecting arms, and bracing stabilizes the run without front columns crossing the loading face. Pipe, bar, tube, lumber, and sheet stock can have defined positions that remain accessible between deliveries.",
    "image": "https://tampapalletracks.com/__l5e/assets-v1/25012002-bee0-4c4a-be09-e866fca9aa7c/cantilever-rack-1.jpg",
    "provider": {
      "@type": "LocalBusiness",
      "@id": "https://tampapalletracks.com/#business",
      "name": "Tampa Pallet Racks",
      "url": "https://tampapalletracks.com",
      "telephone": "(813) 723-3771",
      "parentOrganization": {
        "@type": "Organization",
        "name": "Warehouse Equipment & Supplies Co.",
        "url": "https://www.warehouseequipmentsite.com"
      },
      "address": {
        "@type": "PostalAddress",
        "streetAddress": "7402 N 56th St., Ste 355-580",
        "addressLocality": "Tampa",
        "addressRegion": "FL",
        "postalCode": "33617",
        "addressCountry": "US"
      },
      "hasMap": "https://www.google.com/maps/embed?pb=!1m18!1m12!1m3!1d3522.3167634435335!2d-82.3943389!3d28.0147927!2m3!1f0!2f0!3f0!3m2!1i1024!2i768!4f13.1!3m3!1m2!1s0x88c2c7a475085823%3A0xc0b4b409c2714a64!2sTampa%20Pallet%20Racks!5e0!3m2!1sen!2sus!4v1771089729192!5m2!1sen!2sus"
    },
    "areaServed": [
      {
        "@type": "Place",
        "name": "Ybor City, Florida"
      },
      {
        "@type": "Place",
        "name": "Adamo Drive"
      },
      {
        "@type": "Place",
        "name": "22nd Street corridor"
      },
      {
        "@type": "Place",
        "name": "East Tampa"
      }
    ]
  },
  {
    "@context": "https://schema.org",
    "@type": "BreadcrumbList",
    "itemListElement": [
      {
        "@type": "ListItem",
        "position": 1,
        "name": "Home",
        "item": "https://tampapalletracks.com/"
      },
      {
        "@type": "ListItem",
        "position": 2,
        "name": "Service Area",
        "item": "https://tampapalletracks.com/service-area"
      },
      {
        "@type": "ListItem",
        "position": 3,
        "name": "Ybor City",
        "item": "https://tampapalletracks.com/service-area/ybor-city"
      },
      {
        "@type": "ListItem",
        "position": 4,
        "name": "Cantilever Rack",
        "item": "https://tampapalletracks.com/service-area/ybor-city/cantilever-rack"
      }
    ]
  },
  {
    "@context": "https://schema.org",
    "@type": "FAQPage",
    "mainEntity": [
      {
        "@type": "Question",
        "name": "Can the run follow an interrupted wall line?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "It can be planned in separate sections where the structure and access allow. Do not bridge a doorway or building column with unsupported material simply to maintain one continuous storage line."
        }
      },
      {
        "@type": "Question",
        "name": "Should I choose single-sided or double-sided arms?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Choose according to usable approaches and load requirements. An island needs working aisles at both faces, while a perimeter row needs sufficient separation for its base and stored material."
        }
      },
      {
        "@type": "Question",
        "name": "Can sheet packs share levels with bar stock?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Only when each position has the right support and load allowance. Keep the specified sheet surface and bar-bearing points distinct so one product does not become makeshift support for another."
        }
      },
      {
        "@type": "Question",
        "name": "What information starts the quotation?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Begin with a building plan showing clear height, plus the load lengths and heaviest weights. With truck information and the proposed exposure, those details support a free CAD layout and itemized quote for materials and installation."
        }
      }
    ]
  }
]
```