---
title: "Cantilever Rack in Tampa, FL | Long-Load Plans"
url: https://tampapalletracks.com/service-area/tampa/cantilever-rack
description: "Separate long building materials from Tampa receiving lanes. Compare arm layouts and handling access. Free CAD and quote: (813) 723-3771."
lang: en
---

Image: Cantilever Rack warehouse storage system (https://tampapalletracks.com/__l5e/assets-v1/25012002-bee0-4c4a-be09-e866fca9aa7c/cantilever-rack-1.jpg)

Tampa, Florida

# Cantilever Rack in Tampa, FL

Cantilever rack in Tampa puts long building-material bundles onto projecting arms so receiving space does not become permanent floor storage. Uprights and bracing form the supporting spine, while the absence of front columns leaves the material face open. That arrangement suits bar, tube, pipe, lumber, and sheet packs that need support across their length.

Manufacturing and regional distribution along Adamo Drive and in East Tampa can carry both full-length reserve and frequent cut-length withdrawals. Treat those as separate storage cases. The shortest pieces may govern upright spacing even when the longest, heaviest bundles establish the structural loading and handling envelope.

(813) 723-3771

## How cantilever rack geometry controls capacity

A cantilever racking proposal connects bundle depth, bearing points, column limits, and loaded truck movement.

1

### Match depth to the arms

Measure the complete bundle front to back, not just an individual member. Select an arm that supports that depth in the approved position. Longer projection increases the bending demand, so changing arm length requires more than copying an existing weight label.

2

### Locate the supporting uprights

Establish spacing from load stiffness, shortest length, and allowable overhang. Flexible lumber may need more support than a rigid section of similar weight. Every stored length must reach enough arms without relying on adjacent packages to hold it in place.

3

### Check arm and column loading

An arm rating applies to its stated loading condition. The upright and base must carry the combined demands from the installed elevations. Do not multiply the arm label by the number of levels and assume the result is an approved column allowance.

4

### Plan the lift path

Set vertical gaps for the bundle height plus the movement required to clear the supports. A forklift approaching squarely needs room to maneuver both ends. A side-loader changes the travel pattern, but its load bed and lifting motion still influence aisle dimensions.

## Cantilever racking configuration before installation

Your cantilever rack plan must preserve the intended access pattern. Use a single-sided row where access is needed from one face, such as a boundary position with adequate separation from the wall. Consider a double-sided island when two working aisles fit. Compare total loaded depth, base projections, and approach space rather than counting storage faces in isolation.

A cantilever racking arrangement also needs a defined material location. Choose indoor placement for products whose packaging or finish needs shelter. For an outdoor run, specify the exposure and suitable component finish before ordering. Pipe retention, sheet support surfaces, and separation of dissimilar stock belong in the component list; those details should not be improvised after unloading.

Experienced crews are scheduled and managed for installation using the agreed layout and sequence. Assembly includes the specified bases, aligned uprights, bracing, and arm elevations. Later changes in bundle depth or level count need another capacity review, even if the replacement material appears to fit the open space.

Tampa warehouse racking: https://tampapalletracks.com/service-area/tampa
·
Long-load support options: https://tampapalletracks.com/products/cantilever-rack
·
FIFO pallet storage in Tampa: https://tampapalletracks.com/service-area/tampa/pallet-flow-rack
·
Bulk pallet lanes in Tampa: https://tampapalletracks.com/service-area/tampa/drive-in-rack

Building-material distributors receiving mixed bundle lengths

Manufacturers feeding tube and bar to cutting stations

Supply warehouses combining sheet packs with palletized accessories

Call (813) 723-3771: (813) 723-3771

## Why cantilever storage rack differs from pallet rows

Selective pallet rack presents discrete openings between front posts. It is a sensible home for palletized hardware and cartons, but a long bundle spanning several openings complicates withdrawal. The arm system removes that front-post interruption, letting a handler approach the intended support locations without threading the stock through a beam bay.

Tampa Pallet Racks, a division of Warehouse Equipment & Supplies Co., has a supplying and installing background extending to 1997. We use the material list to distinguish open-arm storage from the pallet positions that should remain elsewhere in the building.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Image: Cantilever warehouse racking holding steel tubing (https://tampapalletracks.com/__l5e/assets-v1/a9803396-6119-4d0a-9a67-20b504082c63/cantilever-rack-2.jpg)

Image: Cantilever rack storing lumber and wood products (https://tampapalletracks.com/__l5e/assets-v1/3bc24f26-3824-4b3c-b5d3-9f5952e32f4b/cantilever-rack-3.jpg)

### Adamo Drive and East Tampa loading patterns

Adamo Drive building-material traffic and East Tampa manufacturing needs can put receiving and picking in the same aisle. Place a designated transfer area between the unloading point and the storage faces. Map the longest bundle through that route before committing to a row orientation.

port-related freight

regional distribution

and manufacturing

## Recent Pallet Rack Projects

A look at recent pallet rack installations across the Tampa Bay area.

Image: Selective pallet racking with wire decking in a warehouse (https://tampapalletracks.com/assets/project-selective-orange-DLUjHNus.jpg)

### Selective Pallet Racking

Selective pallet racking fitted with wire decking across each level.

Image: Selective pallet racking with wire decking under a wood-truss roof (https://tampapalletracks.com/assets/project-wire-deck-kTFsAcd7.jpg)

### Selective Racking with Wire Decking

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Image: Carton flow racking with roller lanes (https://tampapalletracks.com/assets/project-carton-flow-BKsfA3I5.jpg)

### Carton Flow Racking

Pallet racking set up with carton flow roller lanes on the lower levels.

Image: Drive-in pallet racking with deep storage bays (https://tampapalletracks.com/assets/project-drive-in-DuLjm6zj.jpg)

### Drive-In Pallet Racking

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Image: Selective pallet racking with wire decking (https://tampapalletracks.com/assets/project-selective-green-B7G5EQA3.jpg)

### Selective Pallet Racking with Wire Decking

Image: Selective pallet racking in a warehouse (https://tampapalletracks.com/assets/project-warehouse-rows-4WW32Oc3.jpg)

### Selective Pallet Racking

Selective pallet racking installed across a warehouse.

Image: Selective pallet racking with wire decking (https://tampapalletracks.com/assets/project-high-density-BVVnZNJ0.jpg)

### Selective Pallet Racking

Selective pallet racking fitted with wire decking.

Image: Selective pallet racking in a warehouse (https://tampapalletracks.com/assets/project-warehouse-forklift-Cgd8blAg.jpg)

### Selective Pallet Racking

Selective pallet racking in a warehouse.

Image: Push back pallet racking with nested carts (https://tampapalletracks.com/assets/project-pushback-CcZMrTQ8.jpg)

### Push Back Pallet Racking

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Image: Selective pallet racking along a warehouse wall (https://tampapalletracks.com/assets/project-selective-wall--qV5jUgT.jpg)

### Selective Pallet Racking

Selective pallet racking set up along a warehouse wall.

View More Projects: https://tampapalletracks.com/projects

## Plan your Tampa long-load storage

Call (813) 723-3771 to review load lengths, heaviest weights, clear height, and your building plan. Request a free CAD layout and itemized quote that separates the proposed rack components from the installation scope. Call (813) 723-3771.

### Tampa Pallet Racks

7402 N 56th St.

Ste 355-580

Tampa, FL 33617

(813) 723-3771

Monday - Friday: 7:00 AM - 7:00 PM

## Tampa cantilever rack specification questions

### Can I keep palletized fittings beside long pipe?

### Does a longer arm carry more weight?

### Can short offcuts share the full-length row?

### What should I send for a quote?

## Other Rack Types We Supply in Tampa

### Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details
https://tampapalletracks.com/service-area/tampa

### Pushback Rack

Two to six pallets deep from one aisle, without giving up much reach.

View details
https://tampapalletracks.com/service-area/tampa/pushback-rack

### Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details
https://tampapalletracks.com/service-area/tampa/pallet-flow-rack

### Drive-In Rack

Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.

View details
https://tampapalletracks.com/service-area/tampa/drive-in-rack

### Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details
https://tampapalletracks.com/service-area/tampa/carton-flow-rack

## Nearby Areas We Also Serve

Our delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.

Cantilever Rack in St. Petersburg: https://tampapalletracks.com/service-area/st-petersburg/cantilever-rack
Cantilever Rack in Clearwater: https://tampapalletracks.com/service-area/clearwater/cantilever-rack
Cantilever Rack in Brandon: https://tampapalletracks.com/service-area/brandon/cantilever-rack
Cantilever Rack in Lakeland: https://tampapalletracks.com/service-area/lakeland/cantilever-rack
Cantilever Rack in Plant City: https://tampapalletracks.com/service-area/plant-city/cantilever-rack
Cantilever Rack in Wesley Chapel: https://tampapalletracks.com/service-area/wesley-chapel/cantilever-rack

View All Service Areas: https://tampapalletracks.com/service-area

## Where We Work

Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.

### Tampa Pallet Racks

#### Address

7402 N 56th St.
Ste 355-580
Tampa, FL 33617

#### Phone

(813) 723-3771

#### Business Hours

Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed

## Need Cantilever Rack in Tampa?

Call (813) 723-3771 or request a quote and we will get a layout started.

(813) 723-3771

Call Now: 8137233771

## Structured data

```json
[
  {
    "@context": "https://schema.org",
    "@type": "LocalBusiness",
    "@id": "https://tampapalletracks.com/#business",
    "name": "Tampa Pallet Racks",
    "alternateName": "Tampa Pallet Racks - A Division of Warehouse Equipment & Supplies Co.",
    "description": "Industrial pallet racks and warehouse racking solutions in Tampa, FL. Free warehouse design consultations, pallet rack installation, and warehouse storage optimization for Tampa businesses.",
    "url": "https://tampapalletracks.com",
    "telephone": "(813) 723-3771",
    "address": {
      "@type": "PostalAddress",
      "streetAddress": "7402 N 56th St.",
      "addressLocality": "Tampa",
      "addressRegion": "FL",
      "postalCode": "33617",
      "addressCountry": "US"
    },
    "geo": {
      "@type": "GeoCoordinates",
      "latitude": "27.9506",
      "longitude": "-82.4572"
    },
    "areaServed": {
      "@type": "City",
      "name": "Tampa",
      "containedInPlace": {
        "@type": "State",
        "name": "Florida"
      }
    },
    "openingHoursSpecification": [
      {
        "@type": "OpeningHoursSpecification",
        "dayOfWeek": [
          "Monday",
          "Tuesday",
          "Wednesday",
          "Thursday",
          "Friday"
        ],
        "opens": "07:00",
        "closes": "19:00"
      }
    ],
    "priceRange": "$$",
    "paymentAccepted": "Cash, Credit Card, Check",
    "image": "https://tampapalletracks.com/images/logo.png",
    "sameAs": [
      "https://facebook.com/tampapalletracks",
      "https://linkedin.com/company/tampapalletracks",
      "https://instagram.com/tampapalletracks"
    ],
    "hasOfferCatalog": {
      "@type": "OfferCatalog",
      "name": "Pallet Rack Systems",
      "itemListElement": [
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Selective Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Push Back Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Drive-In Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Warehouse Design Consultation"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Pallet Rack Installation"
          }
        }
      ]
    },
    "makesOffer": {
      "@type": "Offer",
      "itemOffered": {
        "@type": "Service",
        "name": "Pallet Rack Installation in Tampa, FL",
        "serviceType": "Warehouse pallet racking and installation",
        "areaServed": {
          "@type": "City",
          "name": "Tampa"
        },
        "provider": {
          "@type": "LocalBusiness",
          "name": "Tampa Pallet Racks",
          "telephone": "(813) 723-3771"
        }
      }
    }
  },
  {
    "@context": "https://schema.org",
    "@type": "Service",
    "@id": "https://tampapalletracks.com/service-area/tampa/cantilever-rack#service",
    "url": "https://tampapalletracks.com/service-area/tampa/cantilever-rack",
    "name": "Cantilever Rack in Tampa, FL",
    "serviceType": "Cantilever Rack design, supply and installation",
    "description": "Cantilever rack in Tampa puts long building-material bundles onto projecting arms so receiving space does not become permanent floor storage. Uprights and bracing form the supporting spine, while the absence of front columns leaves the material face open. That arrangement suits bar, tube, pipe, lumber, and sheet packs that need support across their length.",
    "image": "https://tampapalletracks.com/__l5e/assets-v1/25012002-bee0-4c4a-be09-e866fca9aa7c/cantilever-rack-1.jpg",
    "provider": {
      "@type": "LocalBusiness",
      "@id": "https://tampapalletracks.com/#business",
      "name": "Tampa Pallet Racks",
      "url": "https://tampapalletracks.com",
      "telephone": "(813) 723-3771",
      "parentOrganization": {
        "@type": "Organization",
        "name": "Warehouse Equipment & Supplies Co.",
        "url": "https://www.warehouseequipmentsite.com"
      },
      "address": {
        "@type": "PostalAddress",
        "streetAddress": "7402 N 56th St., Ste 355-580",
        "addressLocality": "Tampa",
        "addressRegion": "FL",
        "postalCode": "33617",
        "addressCountry": "US"
      },
      "hasMap": "https://www.google.com/maps/embed?pb=!1m18!1m12!1m3!1d3522.3167634435335!2d-82.3943389!3d28.0147927!2m3!1f0!2f0!3f0!3m2!1i1024!2i768!4f13.1!3m3!1m2!1s0x88c2c7a475085823%3A0xc0b4b409c2714a64!2sTampa%20Pallet%20Racks!5e0!3m2!1sen!2sus!4v1771089729192!5m2!1sen!2sus"
    },
    "areaServed": [
      {
        "@type": "Place",
        "name": "Tampa, Florida"
      },
      {
        "@type": "Place",
        "name": "East Tampa"
      },
      {
        "@type": "Place",
        "name": "Adamo Drive corridor"
      },
      {
        "@type": "Place",
        "name": "Port Tampa Bay district"
      },
      {
        "@type": "Place",
        "name": "Hillsborough Avenue"
      }
    ]
  },
  {
    "@context": "https://schema.org",
    "@type": "BreadcrumbList",
    "itemListElement": [
      {
        "@type": "ListItem",
        "position": 1,
        "name": "Home",
        "item": "https://tampapalletracks.com/"
      },
      {
        "@type": "ListItem",
        "position": 2,
        "name": "Service Area",
        "item": "https://tampapalletracks.com/service-area"
      },
      {
        "@type": "ListItem",
        "position": 3,
        "name": "Tampa",
        "item": "https://tampapalletracks.com/service-area/tampa"
      },
      {
        "@type": "ListItem",
        "position": 4,
        "name": "Cantilever Rack",
        "item": "https://tampapalletracks.com/service-area/tampa/cantilever-rack"
      }
    ]
  },
  {
    "@context": "https://schema.org",
    "@type": "FAQPage",
    "mainEntity": [
      {
        "@type": "Question",
        "name": "Can I keep palletized fittings beside long pipe?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Yes, in a layout that gives each format the support it needs. Selective rows can hold the fittings while open arms handle pipe, with truck routes coordinated between them."
        }
      },
      {
        "@type": "Question",
        "name": "Does a longer arm carry more weight?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Not automatically. Greater projection changes the leverage on the arm and upright connection; select capacity for the exact arm length and load position being proposed."
        }
      },
      {
        "@type": "Question",
        "name": "Can short offcuts share the full-length row?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Only where the support arrangement suits their length. A dedicated short-stock section can prevent remnants from falling between supports or disappearing beneath longer bundles."
        }
      },
      {
        "@type": "Question",
        "name": "What should I send for a quote?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Begin with the longest and shortest stock, maximum bundle weight, available clear height, and your building drawing. Include truck details and exposure so the free CAD layout and itemized quote reflect how the material will actually move."
        }
      }
    ]
  }
]
```