---
title: "Cantilever Rack in St. Petersburg, FL"
url: https://tampapalletracks.com/service-area/st-petersburg/cantilever-rack
description: "St. Petersburg long-profile storage with planned arm spacing, rated uprights, and forklift access. Free CAD and quote. Call (813) 723-3771."
lang: en
---

Image: Cantilever Rack warehouse storage system (https://tampapalletracks.com/__l5e/assets-v1/25012002-bee0-4c4a-be09-e866fca9aa7c/cantilever-rack-1.jpg)

St. Petersburg, Florida

# Cantilever Rack in St. Petersburg, FL

Cantilever rack in St. Petersburg supports fabrication stock and long profiles without making a working wall the storage system. Uprights carry projecting arms behind the material, leaving no front columns across the retrieval face. Loads can extend along several support positions, but each product needs adequate bearing throughout its length. That includes the short lengths returned after cutting, not only the full bundles delivered to receiving.

Gateway / Carillon and the 28th Street industrial corridor bring electronics, light manufacturing, and regional distribution into constrained building footprints. Cantilever racking should be drawn alongside the production route rather than fitted into whatever corner remains. Selective pallet rack can handle boxed components and palletized output nearby, while the long-material row provides access suited to profiles, tube, and bar stock.

(813) 723-3771

## Cantilever rack specification and coordinated assembly

For single-sided storage, we look for an edge position that leaves a clear working face toward the material route. Double-sided storage can place different product groups on opposite faces, provided both approaches stay available. Indoor and outdoor arrangements need separate exposure and structural checks. Surface-sensitive profiles and sheet packs may be better assigned indoors, while any outdoor specification must reflect its actual location and stored products. The cantilever rack plan should retain a clear transfer connection between profile storage and fabrication.

Installation is carried out by experienced crews we schedule and manage. The agreed scope establishes base locations, upright alignment, bracing, and arm elevations against the reviewed plan. Capacity information should remain tied to that configuration after handover. Before moving arms or changing a level from light profiles to heavy bar, have the revised arrangement checked rather than assuming the unchanged upright can accept it.

St. Petersburg warehouse racking: https://tampapalletracks.com/service-area/st-petersburg
·
Long-load support options: https://tampapalletracks.com/products/cantilever-rack
·
FIFO pallet storage in St. Petersburg: https://tampapalletracks.com/service-area/st-petersburg/pallet-flow-rack
·
Bulk pallet lanes in St. Petersburg: https://tampapalletracks.com/service-area/st-petersburg/drive-in-rack

Long fabrication profiles near production

Tube and bar assigned by section and weight

Sheet or lumber packs with planned bearing points

Call (813) 723-3771: (813) 723-3771

## Cantilever storage rack arrangement for mixed production

Check access at the busiest transfer point before deciding the final row position. Floor area occupied by a base is only part of the space needed to retrieve long material.

1

### Define stored load families

Record profile lengths, pack depths, and the heaviest bundle in each group. Identify short cut pieces and sheet packs that cannot share the same unsupported spans.

2

### Coordinate bearing points

Place uprights so every assigned product has the required support. Specify decking or product-contact surfaces where narrow arms alone do not provide the needed bearing.

3

### Match arms to the assembly

Choose arm projections and capacities together, then check total column loading. Confirm base selection and bracing for the actual number of faces and planned level arrangement.

4

### Test the handling envelope

Use the forklift dimensions with the longest bundle aboard. Compare a side-loader arrangement where applicable, accounting for transfer clearance rather than assuming a smaller aisle will work.

## Cantilever racking support before storage height

Raising another level does not solve a bearing problem at the levels below. We first check upright spacing against the material stiffness, minimum load length, and intended end overhang. Pipe and thin tube can behave differently from solid bar; lumber and sheet inventory may need additional supports or a specified deck. The design needs to remain suitable after a partial withdrawal changes how much material rests on each arm.

Arm length is selected for the depth projecting out from the column. Its rating depends on the stated loading position, so a heavier pack cannot simply be shifted outward to make room behind it. Combined arm loads must stay within the upright and base specification. We also allow vertical clearance for bundle height, fork placement, and the lifting movement needed to pass any retaining feature.

Tampa Pallet Racks, a division of Warehouse Equipment & Supplies Co., has supplied and installed storage systems since 1997. We use the load review to connect the component list with a drawing that shows where the material sits and how operators reach it.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Image: Cantilever warehouse racking holding steel tubing (https://tampapalletracks.com/__l5e/assets-v1/a9803396-6119-4d0a-9a67-20b504082c63/cantilever-rack-2.jpg)

Image: Cantilever rack storing lumber and wood products (https://tampapalletracks.com/__l5e/assets-v1/3bc24f26-3824-4b3c-b5d3-9f5952e32f4b/cantilever-rack-3.jpg)

### Keep the transfer route visible on the plan

Include assembly benches, carts, and outbound pallet staging in the drawing. Their relationship to the rack determines whether the long-load approach remains available during normal production.

electronics

light manufacturing

and regional distribution

## Recent Pallet Rack Projects

A look at recent pallet rack installations across the Tampa Bay area.

Image: Selective pallet racking with wire decking in a warehouse (https://tampapalletracks.com/assets/project-selective-orange-DLUjHNus.jpg)

### Selective Pallet Racking

Selective pallet racking fitted with wire decking across each level.

Image: Selective pallet racking with wire decking under a wood-truss roof (https://tampapalletracks.com/assets/project-wire-deck-kTFsAcd7.jpg)

### Selective Racking with Wire Decking

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Image: Carton flow racking with roller lanes (https://tampapalletracks.com/assets/project-carton-flow-BKsfA3I5.jpg)

### Carton Flow Racking

Pallet racking set up with carton flow roller lanes on the lower levels.

Image: Drive-in pallet racking with deep storage bays (https://tampapalletracks.com/assets/project-drive-in-DuLjm6zj.jpg)

### Drive-In Pallet Racking

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Image: Selective pallet racking with wire decking (https://tampapalletracks.com/assets/project-selective-green-B7G5EQA3.jpg)

### Selective Pallet Racking with Wire Decking

Image: Selective pallet racking in a warehouse (https://tampapalletracks.com/assets/project-warehouse-rows-4WW32Oc3.jpg)

### Selective Pallet Racking

Selective pallet racking installed across a warehouse.

Image: Selective pallet racking with wire decking (https://tampapalletracks.com/assets/project-high-density-BVVnZNJ0.jpg)

### Selective Pallet Racking

Selective pallet racking fitted with wire decking.

Image: Selective pallet racking in a warehouse (https://tampapalletracks.com/assets/project-warehouse-forklift-Cgd8blAg.jpg)

### Selective Pallet Racking

Selective pallet racking in a warehouse.

Image: Push back pallet racking with nested carts (https://tampapalletracks.com/assets/project-pushback-CcZMrTQ8.jpg)

### Push Back Pallet Racking

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Image: Selective pallet racking along a warehouse wall (https://tampapalletracks.com/assets/project-selective-wall--qV5jUgT.jpg)

### Selective Pallet Racking

Selective pallet racking set up along a warehouse wall.

View More Projects: https://tampapalletracks.com/projects

## Review your long-load arrangement

Contact (813) 723-3771 to discuss stock dimensions, available height, and the equipment moving material between storage and production. Call (813) 723-3771.

### Tampa Pallet Racks

7402 N 56th St.

Ste 355-580

Tampa, FL 33617

(813) 723-3771

Monday - Friday: 7:00 AM - 7:00 PM

## Buying long-profile storage

### Should long profiles go in pallet rack instead?

### Can I add arm levels later?

### How close should the supports be?

### What is needed for a written quote?

## Other Rack Types We Supply in St. Petersburg

### Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details
https://tampapalletracks.com/service-area/st-petersburg

### Pushback Rack

Two to six pallets deep from one aisle, without giving up much reach.

View details
https://tampapalletracks.com/service-area/st-petersburg/pushback-rack

### Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details
https://tampapalletracks.com/service-area/st-petersburg/pallet-flow-rack

### Drive-In Rack

Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.

View details
https://tampapalletracks.com/service-area/st-petersburg/drive-in-rack

### Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details
https://tampapalletracks.com/service-area/st-petersburg/carton-flow-rack

## Nearby Areas We Also Serve

Our delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.

Cantilever Rack in Tampa: https://tampapalletracks.com/service-area/tampa/cantilever-rack
Cantilever Rack in Clearwater: https://tampapalletracks.com/service-area/clearwater/cantilever-rack
Cantilever Rack in Brandon: https://tampapalletracks.com/service-area/brandon/cantilever-rack
Cantilever Rack in Lakeland: https://tampapalletracks.com/service-area/lakeland/cantilever-rack
Cantilever Rack in Plant City: https://tampapalletracks.com/service-area/plant-city/cantilever-rack
Cantilever Rack in Wesley Chapel: https://tampapalletracks.com/service-area/wesley-chapel/cantilever-rack

View All Service Areas: https://tampapalletracks.com/service-area

## Where We Work

Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.

### Tampa Pallet Racks

#### Address

7402 N 56th St.
Ste 355-580
Tampa, FL 33617

#### Phone

(813) 723-3771

#### Business Hours

Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed

## Need Cantilever Rack in St. Petersburg?

Call (813) 723-3771 or request a quote and we will get a layout started.

(813) 723-3771

Call Now: 8137233771

## Structured data

```json
[
  {
    "@context": "https://schema.org",
    "@type": "LocalBusiness",
    "@id": "https://tampapalletracks.com/#business",
    "name": "Tampa Pallet Racks",
    "alternateName": "Tampa Pallet Racks - A Division of Warehouse Equipment & Supplies Co.",
    "description": "Industrial pallet racks and warehouse racking solutions in St. Petersburg, FL. Free warehouse design consultations, pallet rack installation, and warehouse storage optimization for St. Petersburg businesses.",
    "url": "https://tampapalletracks.com",
    "telephone": "(813) 723-3771",
    "address": {
      "@type": "PostalAddress",
      "streetAddress": "7402 N 56th St.",
      "addressLocality": "Tampa",
      "addressRegion": "FL",
      "postalCode": "33617",
      "addressCountry": "US"
    },
    "geo": {
      "@type": "GeoCoordinates",
      "latitude": "27.9506",
      "longitude": "-82.4572"
    },
    "areaServed": {
      "@type": "City",
      "name": "St. Petersburg",
      "containedInPlace": {
        "@type": "State",
        "name": "Florida"
      }
    },
    "openingHoursSpecification": [
      {
        "@type": "OpeningHoursSpecification",
        "dayOfWeek": [
          "Monday",
          "Tuesday",
          "Wednesday",
          "Thursday",
          "Friday"
        ],
        "opens": "07:00",
        "closes": "19:00"
      }
    ],
    "priceRange": "$$",
    "paymentAccepted": "Cash, Credit Card, Check",
    "image": "https://tampapalletracks.com/images/logo.png",
    "sameAs": [
      "https://facebook.com/tampapalletracks",
      "https://linkedin.com/company/tampapalletracks",
      "https://instagram.com/tampapalletracks"
    ],
    "hasOfferCatalog": {
      "@type": "OfferCatalog",
      "name": "Pallet Rack Systems",
      "itemListElement": [
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Selective Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Push Back Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Drive-In Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Warehouse Design Consultation"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Pallet Rack Installation"
          }
        }
      ]
    },
    "makesOffer": {
      "@type": "Offer",
      "itemOffered": {
        "@type": "Service",
        "name": "Pallet Rack Installation in St. Petersburg, FL",
        "serviceType": "Warehouse pallet racking and installation",
        "areaServed": {
          "@type": "City",
          "name": "St. Petersburg"
        },
        "provider": {
          "@type": "LocalBusiness",
          "name": "Tampa Pallet Racks",
          "telephone": "(813) 723-3771"
        }
      }
    }
  },
  {
    "@context": "https://schema.org",
    "@type": "Service",
    "@id": "https://tampapalletracks.com/service-area/st-petersburg/cantilever-rack#service",
    "url": "https://tampapalletracks.com/service-area/st-petersburg/cantilever-rack",
    "name": "Cantilever Rack in St. Petersburg, FL",
    "serviceType": "Cantilever Rack design, supply and installation",
    "description": "Cantilever rack in St. Petersburg supports fabrication stock and long profiles without making a working wall the storage system. Uprights carry projecting arms behind the material, leaving no front columns across the retrieval face. Loads can extend along several support positions, but each product needs adequate bearing throughout its length. That includes the short lengths returned after cutting, not only the full bundles delivered to receiving.",
    "image": "https://tampapalletracks.com/__l5e/assets-v1/25012002-bee0-4c4a-be09-e866fca9aa7c/cantilever-rack-1.jpg",
    "provider": {
      "@type": "LocalBusiness",
      "@id": "https://tampapalletracks.com/#business",
      "name": "Tampa Pallet Racks",
      "url": "https://tampapalletracks.com",
      "telephone": "(813) 723-3771",
      "parentOrganization": {
        "@type": "Organization",
        "name": "Warehouse Equipment & Supplies Co.",
        "url": "https://www.warehouseequipmentsite.com"
      },
      "address": {
        "@type": "PostalAddress",
        "streetAddress": "7402 N 56th St., Ste 355-580",
        "addressLocality": "Tampa",
        "addressRegion": "FL",
        "postalCode": "33617",
        "addressCountry": "US"
      },
      "hasMap": "https://www.google.com/maps/embed?pb=!1m18!1m12!1m3!1d3522.3167634435335!2d-82.3943389!3d28.0147927!2m3!1f0!2f0!3f0!3m2!1i1024!2i768!4f13.1!3m3!1m2!1s0x88c2c7a475085823%3A0xc0b4b409c2714a64!2sTampa%20Pallet%20Racks!5e0!3m2!1sen!2sus!4v1771089729192!5m2!1sen!2sus"
    },
    "areaServed": [
      {
        "@type": "Place",
        "name": "St. Petersburg, Florida"
      },
      {
        "@type": "Place",
        "name": "Gateway / Carillon"
      },
      {
        "@type": "Place",
        "name": "28th Street industrial corridor"
      },
      {
        "@type": "Place",
        "name": "Pinellas Park"
      }
    ]
  },
  {
    "@context": "https://schema.org",
    "@type": "BreadcrumbList",
    "itemListElement": [
      {
        "@type": "ListItem",
        "position": 1,
        "name": "Home",
        "item": "https://tampapalletracks.com/"
      },
      {
        "@type": "ListItem",
        "position": 2,
        "name": "Service Area",
        "item": "https://tampapalletracks.com/service-area"
      },
      {
        "@type": "ListItem",
        "position": 3,
        "name": "St. Petersburg",
        "item": "https://tampapalletracks.com/service-area/st-petersburg"
      },
      {
        "@type": "ListItem",
        "position": 4,
        "name": "Cantilever Rack",
        "item": "https://tampapalletracks.com/service-area/st-petersburg/cantilever-rack"
      }
    ]
  },
  {
    "@context": "https://schema.org",
    "@type": "FAQPage",
    "mainEntity": [
      {
        "@type": "Question",
        "name": "Should long profiles go in pallet rack instead?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Compare how the load is supported and removed. Selective storage suits pallets; open-front arms are often the better match for long stock handled directly as bundles or individual lengths."
        }
      },
      {
        "@type": "Question",
        "name": "Can I add arm levels later?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Only after checking the changed loading against the complete assembly rating. Empty upright holes do not establish additional weight capacity or sufficient vertical handling clearance."
        }
      },
      {
        "@type": "Question",
        "name": "How close should the supports be?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Spacing follows stiffness, load length, and bearing needs rather than a universal interval. Include the shortest pieces you intend to store when defining the support arrangement."
        }
      },
      {
        "@type": "Question",
        "name": "What is needed for a written quote?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Supply load lengths, heaviest weights, clear height, and the building plan. Those inputs support a free CAD drawing and an itemized equipment quote."
        }
      }
    ]
  }
]
```