---
title: "Cantilever Rack in Lakeland, FL | Arm Layouts"
url: https://tampapalletracks.com/service-area/lakeland/cantilever-rack
description: "Plan Lakeland production-stock arms around bundle depth, weight and side-loader movement. Free CAD and itemized quote: (813) 723-3771."
lang: en
---

Image: Cantilever Rack warehouse storage system (https://tampapalletracks.com/__l5e/assets-v1/25012002-bee0-4c4a-be09-e866fca9aa7c/cantilever-rack-1.jpg)

Lakeland, Florida

# Cantilever Rack in Lakeland, FL

Cantilever rack helps Lakeland manufacturers organize long production material by length and section instead of stacking bundles across working floor. Arms extend from braced uprights without front columns interrupting the retrieval face. That open frontage accommodates bar, pipe, tube and lumber whose lengths do not fit conventional pallet positions.

County Line Road distribution activity and manufacturing around Lakeland Airside Center create different handling patterns. A reserve bundle arriving by forklift may later feed smaller production picks. The storage plan needs to support both the full incoming load and the remaining stock after material has been removed.

(813) 723-3771

## Cantilever rack geometry for changing bundles

Production storage should remain workable as bundles shrink and stock lengths change during a shift.

1

### Identify the bearing width

Choose arm length from the actual front-to-back depth of stored material. A wide lumber pack and a narrow steel bundle can share a length but require different arm projections. Check clearance behind the load without treating the upright as a bearing surface.

2

### Evaluate the loaded assembly

The heaviest weight establishes only part of the specification. Each arm needs adequate capacity for its share and load position, while the upright, base and bracing must suit the cumulative loading. Adding levels changes that calculation even when individual bundles remain unchanged.

3

### Check sag between uprights

Support spacing must accommodate stiffness, bundle integrity and permitted end overhang. Thin tube or sheet material can need closer bearing points than solid bar. Confirm the shortest production remainder can still rest on the required supports rather than balancing between intended storage locations.

4

### Provide withdrawal space

Set elevations to allow forks beneath the bundle and sufficient lift above arm tips. A side-loader may handle long pieces parallel to its travel direction; a counterbalance forklift needs turning room for the load ends. Compare those movements on the drawing before fixing aisle widths.

## Specify a cantilever storage rack by load

A single-sided perimeter run keeps retrieval on one face, while a double-sided island presents separate faces to adjacent aisles. Calculate the base projection and loaded depth on each side, not just column thickness. Separate levels or locations for sheet goods may need approved decking or other load-spreading accessories.

Outdoor storage requires a finish and structural arrangement selected for the exposure; indoor positioning requires attention to overhead obstructions and available clear height. Stops for round stock must suit the material without obstructing forks. We schedule and manage experienced installation crews, with assembly sequencing, upright alignment, bracing and final arm elevations tied to the accepted plan.

Lakeland warehouse racking: https://tampapalletracks.com/service-area/lakeland
·
Long-load support options: https://tampapalletracks.com/products/cantilever-rack
·
FIFO pallet storage in Lakeland: https://tampapalletracks.com/service-area/lakeland/pallet-flow-rack
·
Bulk pallet lanes in Lakeland: https://tampapalletracks.com/service-area/lakeland/drive-in-rack

Manufacturing bar stock indexed by section and length

Tube bundles withdrawn by side-loader

Lumber or sheet reserves with defined support requirements

Call (813) 723-3771: (813) 723-3771

## Where cantilever racking fits production

Start by separating pallet loads from unsupported long products. Selective storage offers direct pallet access for packaged components; cantilever racking presents horizontal material across several arms. Neither format replaces the other when a facility carries both finished goods and lengthy raw stock.

As the storage division of Warehouse Equipment & Supplies Co., Tampa Pallet Racks draws on a supplying and installing history dating to 1997. Our proposal identifies the arm arrangement and structural components so buyers can compare equivalent support conditions rather than nominal row lengths.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Image: Cantilever warehouse racking holding steel tubing (https://tampapalletracks.com/__l5e/assets-v1/a9803396-6119-4d0a-9a67-20b504082c63/cantilever-rack-2.jpg)

Image: Cantilever rack storing lumber and wood products (https://tampapalletracks.com/__l5e/assets-v1/3bc24f26-3824-4b3c-b5d3-9f5952e32f4b/cantilever-rack-3.jpg)

### Keep receiving separate from machine feed

Production supply and regional logistics do not always peak together. Keep the material receiving position distinct from the machine-feed route, and allow a place to check bundle labels before the truck approaches the assigned arms.

regional logistics

food distribution

and manufacturing

## Recent Pallet Rack Projects

A look at recent pallet rack installations across the Tampa Bay area.

Image: Selective pallet racking with wire decking in a warehouse (https://tampapalletracks.com/assets/project-selective-orange-DLUjHNus.jpg)

### Selective Pallet Racking

Selective pallet racking fitted with wire decking across each level.

Image: Selective pallet racking with wire decking under a wood-truss roof (https://tampapalletracks.com/assets/project-wire-deck-kTFsAcd7.jpg)

### Selective Racking with Wire Decking

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Image: Carton flow racking with roller lanes (https://tampapalletracks.com/assets/project-carton-flow-BKsfA3I5.jpg)

### Carton Flow Racking

Pallet racking set up with carton flow roller lanes on the lower levels.

Image: Drive-in pallet racking with deep storage bays (https://tampapalletracks.com/assets/project-drive-in-DuLjm6zj.jpg)

### Drive-In Pallet Racking

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Image: Selective pallet racking with wire decking (https://tampapalletracks.com/assets/project-selective-green-B7G5EQA3.jpg)

### Selective Pallet Racking with Wire Decking

Image: Selective pallet racking in a warehouse (https://tampapalletracks.com/assets/project-warehouse-rows-4WW32Oc3.jpg)

### Selective Pallet Racking

Selective pallet racking installed across a warehouse.

Image: Selective pallet racking with wire decking (https://tampapalletracks.com/assets/project-high-density-BVVnZNJ0.jpg)

### Selective Pallet Racking

Selective pallet racking fitted with wire decking.

Image: Selective pallet racking in a warehouse (https://tampapalletracks.com/assets/project-warehouse-forklift-Cgd8blAg.jpg)

### Selective Pallet Racking

Selective pallet racking in a warehouse.

Image: Push back pallet racking with nested carts (https://tampapalletracks.com/assets/project-pushback-CcZMrTQ8.jpg)

### Push Back Pallet Racking

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Image: Selective pallet racking along a warehouse wall (https://tampapalletracks.com/assets/project-selective-wall--qV5jUgT.jpg)

### Selective Pallet Racking

Selective pallet racking set up along a warehouse wall.

View More Projects: https://tampapalletracks.com/projects

## Cantilever rack: build a comparable material quote

Request a free CAD layout and itemized quote using your load lengths, heaviest weights, clear height and building plan. Discuss production access at (813) 723-3771. Call (813) 723-3771.

### Tampa Pallet Racks

7402 N 56th St.

Ste 355-580

Tampa, FL 33617

(813) 723-3771

Monday - Friday: 7:00 AM - 7:00 PM

## Production-stock buying questions

### Can we store partly opened bundles?

### Do sheets need a continuous shelf?

### Is double-sided storage always the better choice?

### What information starts a price comparison?

## Other Rack Types We Supply in Lakeland

### Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details
https://tampapalletracks.com/service-area/lakeland

### Pushback Rack

Two to six pallets deep from one aisle, without giving up much reach.

View details
https://tampapalletracks.com/service-area/lakeland/pushback-rack

### Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details
https://tampapalletracks.com/service-area/lakeland/pallet-flow-rack

### Drive-In Rack

Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.

View details
https://tampapalletracks.com/service-area/lakeland/drive-in-rack

### Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details
https://tampapalletracks.com/service-area/lakeland/carton-flow-rack

## Nearby Areas We Also Serve

Our delivery and installation territory covers Tampa Bay, so one team can handle multiple buildings for the same company.

Cantilever Rack in Tampa: https://tampapalletracks.com/service-area/tampa/cantilever-rack
Cantilever Rack in St. Petersburg: https://tampapalletracks.com/service-area/st-petersburg/cantilever-rack
Cantilever Rack in Clearwater: https://tampapalletracks.com/service-area/clearwater/cantilever-rack
Cantilever Rack in Brandon: https://tampapalletracks.com/service-area/brandon/cantilever-rack
Cantilever Rack in Plant City: https://tampapalletracks.com/service-area/plant-city/cantilever-rack
Cantilever Rack in Wesley Chapel: https://tampapalletracks.com/service-area/wesley-chapel/cantilever-rack

View All Service Areas: https://tampapalletracks.com/service-area

## Where We Work

Located in Tampa, we serve the entire Tampa Bay area with industrial pallet racks and warehouse storage solutions.

### Tampa Pallet Racks

#### Address

7402 N 56th St.
Ste 355-580
Tampa, FL 33617

#### Phone

(813) 723-3771

#### Business Hours

Monday - Friday: 7:00 AM - 7:00 PM
Saturday: Closed
Sunday: Closed

## Need Cantilever Rack in Lakeland?

Call (813) 723-3771 or request a quote and we will get a layout started.

(813) 723-3771

Call Now: 8137233771

## Structured data

```json
[
  {
    "@context": "https://schema.org",
    "@type": "LocalBusiness",
    "@id": "https://tampapalletracks.com/#business",
    "name": "Tampa Pallet Racks",
    "alternateName": "Tampa Pallet Racks - A Division of Warehouse Equipment & Supplies Co.",
    "description": "Industrial pallet racks and warehouse racking solutions in Lakeland, FL. Free warehouse design consultations, pallet rack installation, and warehouse storage optimization for Lakeland businesses.",
    "url": "https://tampapalletracks.com",
    "telephone": "(813) 723-3771",
    "address": {
      "@type": "PostalAddress",
      "streetAddress": "7402 N 56th St.",
      "addressLocality": "Tampa",
      "addressRegion": "FL",
      "postalCode": "33617",
      "addressCountry": "US"
    },
    "geo": {
      "@type": "GeoCoordinates",
      "latitude": "27.9506",
      "longitude": "-82.4572"
    },
    "areaServed": {
      "@type": "City",
      "name": "Lakeland",
      "containedInPlace": {
        "@type": "State",
        "name": "Florida"
      }
    },
    "openingHoursSpecification": [
      {
        "@type": "OpeningHoursSpecification",
        "dayOfWeek": [
          "Monday",
          "Tuesday",
          "Wednesday",
          "Thursday",
          "Friday"
        ],
        "opens": "07:00",
        "closes": "19:00"
      }
    ],
    "priceRange": "$$",
    "paymentAccepted": "Cash, Credit Card, Check",
    "image": "https://tampapalletracks.com/images/logo.png",
    "sameAs": [
      "https://facebook.com/tampapalletracks",
      "https://linkedin.com/company/tampapalletracks",
      "https://instagram.com/tampapalletracks"
    ],
    "hasOfferCatalog": {
      "@type": "OfferCatalog",
      "name": "Pallet Rack Systems",
      "itemListElement": [
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Selective Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Push Back Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Drive-In Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Warehouse Design Consultation"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Pallet Rack Installation"
          }
        }
      ]
    },
    "makesOffer": {
      "@type": "Offer",
      "itemOffered": {
        "@type": "Service",
        "name": "Pallet Rack Installation in Lakeland, FL",
        "serviceType": "Warehouse pallet racking and installation",
        "areaServed": {
          "@type": "City",
          "name": "Lakeland"
        },
        "provider": {
          "@type": "LocalBusiness",
          "name": "Tampa Pallet Racks",
          "telephone": "(813) 723-3771"
        }
      }
    }
  },
  {
    "@context": "https://schema.org",
    "@type": "Service",
    "@id": "https://tampapalletracks.com/service-area/lakeland/cantilever-rack#service",
    "url": "https://tampapalletracks.com/service-area/lakeland/cantilever-rack",
    "name": "Cantilever Rack in Lakeland, FL",
    "serviceType": "Cantilever Rack design, supply and installation",
    "description": "Cantilever rack helps Lakeland manufacturers organize long production material by length and section instead of stacking bundles across working floor. Arms extend from braced uprights without front columns interrupting the retrieval face. That open frontage accommodates bar, pipe, tube and lumber whose lengths do not fit conventional pallet positions.",
    "image": "https://tampapalletracks.com/__l5e/assets-v1/25012002-bee0-4c4a-be09-e866fca9aa7c/cantilever-rack-1.jpg",
    "provider": {
      "@type": "LocalBusiness",
      "@id": "https://tampapalletracks.com/#business",
      "name": "Tampa Pallet Racks",
      "url": "https://tampapalletracks.com",
      "telephone": "(813) 723-3771",
      "parentOrganization": {
        "@type": "Organization",
        "name": "Warehouse Equipment & Supplies Co.",
        "url": "https://www.warehouseequipmentsite.com"
      },
      "address": {
        "@type": "PostalAddress",
        "streetAddress": "7402 N 56th St., Ste 355-580",
        "addressLocality": "Tampa",
        "addressRegion": "FL",
        "postalCode": "33617",
        "addressCountry": "US"
      },
      "hasMap": "https://www.google.com/maps/embed?pb=!1m18!1m12!1m3!1d3522.3167634435335!2d-82.3943389!3d28.0147927!2m3!1f0!2f0!3f0!3m2!1i1024!2i768!4f13.1!3m3!1m2!1s0x88c2c7a475085823%3A0xc0b4b409c2714a64!2sTampa%20Pallet%20Racks!5e0!3m2!1sen!2sus!4v1771089729192!5m2!1sen!2sus"
    },
    "areaServed": [
      {
        "@type": "Place",
        "name": "Lakeland, Florida"
      },
      {
        "@type": "Place",
        "name": "County Line Road"
      },
      {
        "@type": "Place",
        "name": "I-4 corridor"
      },
      {
        "@type": "Place",
        "name": "Lakeland Airside Center"
      }
    ]
  },
  {
    "@context": "https://schema.org",
    "@type": "BreadcrumbList",
    "itemListElement": [
      {
        "@type": "ListItem",
        "position": 1,
        "name": "Home",
        "item": "https://tampapalletracks.com/"
      },
      {
        "@type": "ListItem",
        "position": 2,
        "name": "Service Area",
        "item": "https://tampapalletracks.com/service-area"
      },
      {
        "@type": "ListItem",
        "position": 3,
        "name": "Lakeland",
        "item": "https://tampapalletracks.com/service-area/lakeland"
      },
      {
        "@type": "ListItem",
        "position": 4,
        "name": "Cantilever Rack",
        "item": "https://tampapalletracks.com/service-area/lakeland/cantilever-rack"
      }
    ]
  },
  {
    "@context": "https://schema.org",
    "@type": "FAQPage",
    "mainEntity": [
      {
        "@type": "Question",
        "name": "Can we store partly opened bundles?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Yes, when remaining pieces stay contained and supported as specified. Reassess loose stock handling rather than assuming packaging will continue distributing weight after straps are removed."
        }
      },
      {
        "@type": "Question",
        "name": "Do sheets need a continuous shelf?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Some sheet products require closely spaced or continuous support to control bending. Provide thickness, dimensions and handling orientation so the specified surface matches the product rather than assuming bare arms are sufficient."
        }
      },
      {
        "@type": "Question",
        "name": "Is double-sided storage always the better choice?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Not when one face would be inaccessible or would interrupt production travel. Compare usable positions and truck approaches, including the entire base and loaded footprint, instead of counting arms alone."
        }
      },
      {
        "@type": "Question",
        "name": "What information starts a price comparison?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Provide material sizes, maximum bundle weights and handling equipment. An itemized proposal can then separate uprights, arms, bases, bracing, accessories and installation against the same planned arrangement."
        }
      }
    ]
  }
]
```